Search results

ok so not too many updates other than interior stuff. I got my aem uego in a couple days ago and decided to install it along with my other gauges in my pod. I also got an rpm switch ordered. the reason: hooking it up to my rpm gauge. Wiring in some red leds to it on a relay hooked up to my blue...

yeah the ignition setup is temporary. Im going to be pickin up a dry carbon fiber gte cover and polishing some gte valve covers. Also going ffim and using some is300 coil packs to get rid of that big stock 7m one!

Here are a couple pics of my shit box... its only n/a for emissions purposes, but i figured id post it here cause n/a as we speak. After emissions.....the fun starts... and what is going on after emissions.....

7m arp headbolts are the one usefull thing from a 7m. they make great engine stand bolts! i use them all the time! they work well for 1mz's and 3vz's as well!

Well after over a year of sitting, she breathes again!I had to modify a couple things. The throttle body that i got with the 2j was trashed so i could use it. I took a traction contol tb and swapped over the iac, tps, and removed the trac motor. when i tried installing it before modifying, it...

ive got one for $40 shipped.

". also the turbo manufacture set the waste gate a little safer then i would like so i also have the boost controller ready to be installed as well which will bump up the boost to a potential of 25 psi" :wuteva: wtf. this guy is talking out of his ass. he clearly thinks he knows more...

i already have an ffim from a gte. i want to modify it to work on my ge. what do you mean it wont clear the hood? the gte and ge sit in the car the same and the hood clears no problem. am i missing something??

got the housing with the turbo from someone on craigslist. That is infact the same green turbo that i decided to polish. I kinda got scared of the green at the last second and decided to go with plan 2. polished!

im using driftmotion's ac delete belt. works perfect and maintains great tension too. My battery is already relocated so i don't have to worry about that. just worried about clearances on the ffim by the brake booster.

yeah seriously. im just researching what all im going to need in order to run one. ie electronics, tos, iac, throttle body. I just want to make sure when i order one, its the right style i need.

well i got some new things. got some 550's so i can start out at higher boost. also got some ST front and rear anti sway bars for the poopra with poly mounts i paint matched to my bay. should help out a bit. got the new bellhousing bolted up on the tranny. Mounted up the turbo. my oil drain an...

haha thats an old pic. i got rid of that setup. i know have a ps cooler that i need to tuck behind my fog light holes in my new bumper.

ok so another small update. i was going around thinking about how i was going to work out the oil return line for the oil pan. normally one would just get the $35 adapter from driftmotion, but it has a small hole for the return so i decided to try something different. i went to lopers and got a...

ok so another update: just ordered my bellhousing! $317 shipped new! and here are just some more pics of the other things i gathered this week. lightweight 1jz flywheel an fittings for turbo feed and return and some others. 3 gauge fitted pillar pod, stainless t4 gasket, map ecu and some...

thanks all for the great comments! yeah jake we can get your wheel done. i have the whole oven and powdercoat system set up and ready to go. in fact i am powdercoating more parts tonight! both mine and dominics for his boosted v6 motor im building for his mr2. i still need to powdercoat my...

it would take individual throttle bodies! duh! but really, you would need to figure out if you want carborated or fuel injected itb's. you could take off six from a gsxr, make an adapting throttle linage, get each itb running as close...

ok so a small update. i finally ordered my lightweight flywheel and stuff so that should be coming in. also i ordered some interesting colors to powdercoat some parts. i decided to change up the color scheme on my engine bay so here is just a small hint of what is to follow. now i know some will...

he has no cel period. it never turns on. i know for a fact he has codes. im not worried about that though, i just want to know if there is a way to pull them as if the cluster didn't exist

here are some of my old rims... 16x7 and 16x8 i believe they are dotz king leone rims from the uk.