Search results

FTFY

VP c10 or any of the wide variety of gas stations that have 110 at the pump. Propane wouldn't be bad and E85 should have the octane needed, if you can find it around you. IIRC CJsupra90 was going to use twin ct2657s, that would be great spool and great power for pump gas numbers, just...

Stats on the dragster?

From what I have heard, and seen they are the best. Slow66 ran one in his DD 10.5 second car and it held up. He said he probably will be using one in his new drag car as well. If they can take that kind of beating, then I would run one.

The fall off is not that bad, maybe 20-25whp or so. That torque more than makes up for that falloff however.

Then give it a shot. Worse comes to worst, you just put the two ends back together. Remember, anything over the speed limit is to be done on a closed track, not on public roads. :biglaugh:

probably the best album they created, hard to compare anything to that

Yep, I wouldn't do this if the ECU controls the ABS (and you have abs).

Good job man, BTW whats up? haven't seen you in a while.

Get a DD, it is the best thing you can do when owning a supra. Something good on gas and reliable.

If you can find any pinouts, there is one wire that should be labled as a speed or speedo wire. These cars dont use an electronic speedo (other than the digidash cars). cut that wire, if it doesnt remove the cut then splice it back together.

Sorry, that was in refference to the 1jz. Ill look up the wiring diagrams for the 5mge and find the pin and connector.

I have this done, it is is the pink wire in pin 8 of Ig1. The CEL only comes on over 110, it isn't on all the time.

side view. if you take the bottom out, it should still hold up just fine. the trick to the flex would be to use the balsal wood as only a top cover over the bass, using the bass as runners along the side, and for the pillars. Balsal sucks structurally. Off the wall idea, but you might want...

Indistructable, 0 spoke lump of metal.

I will sell you a turbo setup that will get you to the 11s, make ~550whp (as done on a 7m with the same turbo). Should see full boost close to 3500 and possibly less with a standalone. PM me if you want more info.

Once you put in the cat, everything will quiet down.

I think that they are the m12 x 1.25 just like everything else on the supra.

Duane, you spray that monster yet? You know what they say about 1000whp supras...

http://ttcperformance.com/shop/index.php?option=com_virtuemart&page=shop.browse&category_id=6&Itemid=1 click on the stroker kit option and look. 4.5l with 12:1 compression would be a nice little punch in a supra, along with some cams.