Search results

It is, but one thing you'll notice if you use those quick connectors, your wiring will not only look like crap, but it doesn't make a good connection. Plus, if you do take them off, they still cut into the wire's insulation, meaning you're gonna need to either tape it, or (preferably, IMO)...

Hard to use heat shrink that way though ;). (Unless it's near the connector and you pull the pin out of the connector, I do that sometimes).

Cut wire, strip ends, strip end of new wire, thread wire through heat-shrink, solder, shrink heat shrink onto wire. Repeat process for all wires required. Rewrap harness. :) Tap connectors suck!

It wasn't directed at you, haha. Just quoting prices for people. :)

Can't find that page! :(

Hook +12V and Ground to the window motor, it will move it up, and if it doesn't, then you need to start looking for some new motors.

He doesn't own a MK3 anymore as far as I know, but he's still on Supraforums quite a bit. Look him up on Supraforums.com.

$7.29 for both of the seals listed on eBay, list price, with a discount, it would be about $5.40... geez man, lol.

I think the stock pressure sensor is good to 2 bar, maybe it was less, in any case, it's much higher than 8psi. There was a site on how to modify the stock gauge both to show higher boost and to react faster, both while using the stock pressure sensor.

IJ, I just want to point out that you are a total post whore. I've got 7000 posts on SF, and you've almost got that many here on SM, lol. 2x the post per day average of me! (Though if you add the other 6 forums I visit, it might be more even, but who knows how may YOU visit!) EDIT: I also do...

San Fransisco does suck! (As far as SupraForums go, they're not so bad, unless you break any of their well-planned rules, then you're up for target practice. :))

Thread Moved.

Thread Moved.

I'd go with OEM, TRD, or NGK wires. Sometimes MSD is ok, sometimes they're not, I've had issues with them myself (not on a Supra).

Someone put a pre-89 bumper on an 89. MassSupra89 is right, cars made from August 88 to July 89 are "1989" models and should have the updated bumper.

Thread cleaned up, let's keep this civil. Nash has dyslexia, I'm sure he's doing his best, and I managed to make out what he was trying to say.

Alberta Wheel Repair and Restoration Limited 666 Goddard Avenue NE, Calgary, AB T2K 5X3 Canada (403) 295-0065

Find a GOOD wheel repair shop and ask them about high speed, treatments, and what kind of work they do. If you got it repaired at Alberta Wheel Repair here in Calgary, I'd have no hesitation using it at high speed, they have done amazing work on so many wheels, and I would trust them with it...

You have an 89 with a 3-piece spoiler, correct? If that's the case, you've got LED's in there, and if they're dim, chances are it's a bad connection to the light, so check your wiring.

-Z 3S Not 3SZ, I'm gonna assume that was a typo ;).