Search results

Like I said, I cheched it several times cause I found it hard to beleave myself when I first noticed it. I avererage 28 miles/gallon in the daytime highway driving and the best that I have ever gotton at night was 26 and tend to average 25. Again, I found it hard to beleave myself and is the...

Actually the Cowl section is relitively strong, stronger then a lot think. On another note, just because its a factory threaded hole doesn't mean that it is a strong point or any stronger then anywhere else. Just about all the threaded holes are just holes in the sheet metal with a nut...

the angled cuts to create a bend are not the greatest thing to do from a flow standpoint. if done, they should be kept to a maximun of 5 degrees per cut.

Like stated before, nothing that you can buy, but could be custom made. I am trying to work on something similar for mine. Dont get me wrong, I love pop-up, but I do a lot of night time highway driving and I have checked it a number of times and I loose between 2 to 3 miles to the gallon when...

I see what you mean, but now that you brought that to lite, If you look down at the bottom of it, it shows the clips. Now which one is the one, not really sure but I think that it is the middle one of the three. Thats what the little funky X and 4 dot symbol is for that is pigtailed off of the...

Yes they are different part numbers, but they are both 6tooth worms and the driven is 18 tooth for the turbo and 21tooth for the N/A. I put a 3.727 in a N/A car about 2months ago for a guy and just got the driven gear from a turbo car (33403-69195). It fit and works fine and the speedo is...

Yeah there are metal clips that break just about everytime you try to remove the trim. I know the complete peices are pretty cheap from the dealer, IIRC 4 or 5 bucks. I dont think that you can buy just the clips, plus they would probably be just as much.

Both the N/A and turbo auto trans have the same drive gear internally so if you go with the N/A 4:30 rear, just get the driven gear from a N/A auto trans. They are interchangable and is external (so to speek), its very simple to do. Just unhook the speedo cable down at the tranny and remove...

Yep, have to chime in hear also. Sean and Titan are great. They've helped me out a few time when I was in a jam. It does help me that they are not far from me and my girl lives right around the corner from them, well not for much longer (damn thats gonna suck. no more having her pic up parts for...

The ss set has quite a bit stiffer spring rate then the Flex system Flex Front 12kg/mm Rear 6kg/mm SS Front 16kg/mm Rear 9kg/mm

its a good tap to have as its the same as the headbolt holes in the block so by having that you can chase those out anytime the head is off.

Nope, dead on there Ian. 12mm x 1.25 is correct

Does anyone know if the speedo drive gear on the main shaft and driven gear in the speedo cable adapter are interchangable between the R145 and the W58 trans? I guess that my main concern is whether or not the drive gear on the tranny main shaft is interchangable between the two trannies. I...

Change the two rubber bushings on the rack mounts. mine were shot about a year ago and the same thing, the rack moved side to side when steering.

Ian might be right, but I thought 32mm o.d. and 12mm i.d.

The manual sway is pretty much straight forward. You will need obviously the flywheel and clutch peices, the hydraulic components, and the clutch and brake pedal assembly, trans mount and crossmember, and driveshaft. Installing the pedal assembly is the only hard part. Everything else is...

are you gun-ho about having 10's on the rear? 8's and 9's are both availible in the Matt black. The wheels that are on my car in my sig. are FN01R-C's 17x8 in the front and 17x9 in the rear, both with 43mm offsets. 245/45/17 front and 275/40/17 rear. Fits perfect.

Mark, yeah the bottle neck into 2.5 is going to be a restriction. What kind of resonators are they? I'd try to get them swapped out for ones that have a 3" core section. Depending on make, I might be able to tell you someplace local that will swap them out for you if a 3" core section is...

Hyper Black Matt Black Black w/ Polish

5 Zigen makes the FN01R-C's in black unless they discontinued them. Anyways, yes that wheel size that you listed will fit the MKIII. As for tire size, my seguestion is 235-45-17. This size is ever so slightly larger in diameter then stock tire size, but not enough to cause any problems and...