Search results

7MGE has only one knock sensor, and it's not by the oil filter. It's under the intake manifold, right around cylinder #3. And why are you asking about the 7mge in the 7mgte section? Use the search button at the top right side of the screen- search knock sensor rewire. This is a very...

Got just a teeny bit of progress done recently, but nothing major. Got the tubing in that I needed, so I worked on the wastegate merge. Took alot of cutting, grinding, tack-welding, tack-weld removing and realignment, rotating, and just fiddling in general. I was glad to find that I could make...

Welp, since he cant get the cam out, im assuming he didnt follow the tsrm disassembly procedure, and thats why it's jammed.

Candy red. Pretty sure i can spot a leak if it occurs.

It sometimes gets 'jammed' as the caps are loosened, but all thats required, is to press down on the cam evenly to get the the tension off of it.

If you're hitting fuel cut, it'll feel like the engine shut off for microsecond, and you'll get a check engine light on for about 1 to 2 seconds. It usually indicates a boost leak as mentioned above. If that boost gauge tubing has any leaks, it could be the case as well, but check all of the...

Was there enough cable length to route it that way without it stretching too tight?

And here I thought that there was only one clutch switch...

No- That was a misunderstanding. You stay 2.25- 2.5" on the exhaust for the na. The BIC downpipe is indeed for turbo engines. Just get a standard exhaust. I didn't necessarily mean you should go to the dealer for the exhaust replacement. The are aftermarket companies that make the oem-like...

PS- MFR looks like a pretty good-sized Class D airport, but being as I'm usually in a BE40, I rarely get out to the northwest areas, and when I do, its usually SEA,CYVR, etc.

LOL. It's normal(depending on environmental conditions) to have a little white smoke(that evaporates) on startup when cold. If you're not losing ANY coolant, you're probably fine. If you ARE losing coolant, do a block test and find out for SURE.

Thanks for reading my thread. You do realize, or course, that your thread title will no longer make sense, right? You need to change it to "7M install just went 2J" - or something.

AEM is as capable a system as you can get without going to the pro efi or a haltech system, so yes- you can tune to exactly what you want with it. I'm hoping your new ignition system will cure all your troubles. Did you get the new speedo cable in it yet?

You're giving up the 7MGTE that you had just rebuilt, and are selling out to the JZ clan??

/\ This.

Does it stutter on acceleration? If so, I would check the spark plug valley for contamination- especially water. ANY water in the spark valley will cause a misfire, and it will also cause the "put-put-put" and shaking you mention.

Cool find. How much do they run? I just did this for mine: It allows direct hookup to AN6, and came with the proper sized upper and lower crush washers. $13. Also, I like that you took the time to sleeve your fuel line there. I found that the 90's Toyota trucks utilize a rubber...

PS- I have a brand new direct fit Denso O2 sensor in the box. Lemme know if you want it.

Change the exhaust for new oem exhaust. Yes, replace the valve cover gaskets. I don't think you should replace the head gasket unless it fails a block test. Have the bolts properly retorqued, and you'll be fine for a LONG time. If you mod this car or put a single aftermarket, "JDM-tyte"...

Well yeah, but I "pulled the plug" on it again. I have no reason to finalize the battery mounting until I reinstall the headlights.