Search results

I guess I'll have to take more pictures tomorrow since some didn't make it. Here's some current pictures. I got a set of clear corners today fresh from New Zealand and installed them. Also, here's what my doors are looking like. The pictures of my dash will be retaken tomorrow.

Anybody know how to hotwire a power seat? I need to hotwire my drivers seat so I can move it back a foot. I know it's possible because I've done it before with my windows. I need to know where to put the positive and negative power. Thanks guys. Adam

I did a lot these last 2 days. Here's the list. - Installed door handles/levers - Installed guage cluster from my 90 Supra - Installed rear storage trays - Installed hatch struts from my 90 Supra (turbo model) - Ripped out what's left of the car phone that used to be installed -...

PM Sent

I'm using the 1JZGTE pump. The one that came with the clip. I do need one aphxero. I'll check and see if I have a bolt that can be used to bolt it on. Adam

I believe you are right tlo86. What is that part called? Adam

No, that's not it. The piece has only 1 hole, and is going into to PS resevoir. I'll try and take a pic of the one on my friends car tonight. Adam

I don't know when or how, but the little nipple that bolts to the power steering pump on my 1JZ is missing. The piece that I need bolts to the drivers side of the pump with 2 small bolts and has a nipple on it so that the 1" line can go to it. I need this little piece ASAP!!! I have less than...

Well, I need to find the little nipple that bolts onto the PS pump that the hose attaches to. I got my driveshaft taken out of my 90, but didn't get around to pulling my driveshaft and installing the 2 piece one. I installed the dash and bolted the steering column back up into place, minus the...

I feel your pain bro. I'm boosting about 14 PSi right now with just a cold air intake and 3" catless exhaust. I can only go about 3/4 throttle before I hit boost cut. Pisses me off every time I do it too. Then again, I'd rather hit the fuel/boost cut then blow my turbos/motor. Adam

Well, I got the dash support bar (raw rusty bar) bolted back in and got the rear end of my 90 up off the ground and on jack stands so I can do the driveshaft swap tonight. I also installed a fresh 100 amp and 40 amp fuse in the main fuse block on my 90 so I can fix my wiring issue (stupid...

Damn that guy got owned big time! ROFLMAO! Adam

Simple, I didn't pay for the module. My friend had to take mine, so I made him buy me a new one. As far as the relocation kit goes, I just got a generic kit off of EBay. Adam

http://www.cardomain.com/ride/2667644 This is my 87 that I'm building. I'm updating it every day that I work on it, which has been almost every day for the past week. With any luck it will have my 1J and R154 in it within the next couple weeks. Adam

Installed the drivers side mirror, left rear side marker, new tail light failure module, and swapped windshield wipers in the front because it didn't have any at all. Still need to get a rear windshield wiper (even though I'll never use it). Adam

I had to come up with a responsible sounding name in my email for job applications, so this is what I came up with (7 years ago). I've been too lazy to change it. Adam

I couldn't sleep last night, so I stripped off the masking tape and installed the passenger side power folding mirror (wiring still to come). I also installed a new 2.5 Twin Turbo badge in the grill. Ahhh, fresh paint. I'll install the other side tomorrow night more than likely. Then...

93? You suck! If I want higher than 91 I have to go to Sunoco and get the 100+ stuff at $5+ per gallon. Adam

See, I'm not going crazy (I think) Adam

The guys on SF all seem to agree on Simple Green. Guess I'll use that. Adam