Search results

Keep going, we're beind you! You'll need to cut that wastegate flange off and have it rewelded though. The dump tube will either be angled towards the block or the fender well.

You made that for your quadruple bypass surgeon's pocketbook.

You didn't use enough seal packing material (FIPG) towards the front of the head.... OR you machined the block without machining the front plate... OR you didn't clean the surfaces enough and the FIPG didn't stick... OR if you installed a MHG one of your rivets is sticking up.....

Either the afm died or you have a major boost leak.

Get into your local Pipe fitters union if you want to work on boilers. Get into your local Electricians union if you want to work with wires. Get into your local steel workers union if you want to scale buildings and weld all day. Get into your local masons union if you want to play in...

Because you're pussy whipped? Seriously, a girl who is jellous over a car? Yikes.

Lipp (supra sport) and turbonetics does.

^Bingo! They are main cpu grounds. No groundy, no starty...

Do a leak down test. I'll almost bet money #5 or #6 cyl is starting to leak into the coolant chambers....

No, I mean if your ct26 is leaking coolant through the coolant chamber into the bearing housing oil ports, its pooling up in your oil pan. (This kind of coolant leak is rare) Oil floats on top of water. Water VS rod bearings = RK. :cry:

...

Ct26's don't burn coolant. If it is burning coolant, be prepared for a RK soon.

The sex!

Simple, clean, and awesome!

^Explain

Yup! Thats what most of the guys around here are working with. I dont like the price tag on them though..... $700-1400 depending on who's done what to it. I was hoping some where in the world some one was making a bolt action 44 mag or 357 mag rifle. I know handi rifle has single shot 44...

Indiana deer hunting regulations. Must be a .357 or larger diameter bullet with the case being 1.18 inches or longer and not longer than 1.60 (IIRC)

Yikes.....

Typical "Im going to be a post whore." You need a large pair of snap ring pliers. Take the snap ring out, lightly tap the housing off, and wala! You have the housing in your hands...

Gun question of the week. Im looking for a bolt action 44 magnum rifle or a 357 magnum bolt action rifle. Any body know of any thing out there?