Search results

yes that will be it. loose a little low end but you'll notice that u have gained some top end.

iirc u were running sealed power bearings on ur car? btw was ur crank mic'd right?

nicely put ^^

225.00 +80.00 shipped

keep good plugs and wires in her along with say 91 or 93 gas u should be fine for a while. First time i went out I ran a 14.3 2.5 60ft @ 102 mph. got that 60ft time down and came back and ran a 13.8 @ 102mph

what brand bearings did u run?

a picture would help more then anything.

What The Fuck?!?!?!

lookin good

sure. first you smear some compound on the block and a little on the lapping tool. Pull out ur dowel pins first of course but you should already know that. set your lapping tool on the front of the block. Not putting any weight on the tool you just push and pull. In a big figure 8 motion...

it should help even on a stock head nash. I'm going with a long runner Nash. there are a few guys on here that has the long runner and a few others with the short runner. Hopefully they'll chime in

the lapping tool I have came from reg remier. IIRC it was in the range of 250-350.00 range. It is my buddies I just borrowed it from him and bought some of the cutting compound off him. Lapping the block is time consuming and I was just unhappy that the machine shop couldnt get it any smoother...

none at all. He posted about it a while back with pics. I was on and off the phone with him alot of the time as well. His internet is down and I dunno how long it will be before he gets it back up. Lets just say the sock was brown. lol it was clogged that bad and when he tried to manually run...

check my thread in the build up gallery. I have a pic of the lapping tool and how its done

just keep it tuned well u shouldnt have a problem. i have seen a few 7m's bored to the max with 2jz pistons in them

that would be .050 over. Yes that is the most u can bore it over. Dont screw it up or you will need a new block.

steve had a clogged fuel pump sock. He changed fuel pump and fuel filter and problem was fixed!

i got power folding mirrors with relay and push button sittin in my shop. dunno if I'll ever get to wiring them up or just selling them. Who knows

Looking good! time for engine bay detail!

well ron also does your alt tensioner bracket(u send it to him) and he has a alt drop down bracket made. whats not to love?