Search results

Wow - great first post you have there, pal. No introduction at all (which is what this section is for), technical questions in the wrong forum - did you even READ the sticky? http://www.supramania.com/forums/showthread.php?92021-Guidelines-for-Introduction-Threads Not to mention the...

THIS IS NOT AN INTRODUCTION THREAD! Moved to relevant section.

I would - but i can't justify spending a fortnights food budget on a game :(

Check out my food blog: http://rationalrecipes.blogspot.com I usually pop a recipe up once/twice a month.

Well, the question about 'do i need 550's with the Lexus AFM?' it's asked usually once a week around here - people not searching for the same question thats been answered about a hundred times by now. The Lex AFM is 25% bigger than the stock one. 550cc injectors are 25% larger than the stock...

If you're taking the head off - you might as well do it properly - do a decoke & valve grind (use grease to reseat the collets when re-installing) while it's off. Once you've stripped the head, i found that a Karcher jet wash with really hot soapy water sorted out the majority of the grunge - a...

I never had a C64 - in the UK, the incumbent Acorn, Sinclair & Amstrad held the market more than Commodore did, at least until the Amiga & Atari ST era. Myself? I had one of these as a kid, with a tape deck: 65C02 with 32k of RAM - ballin', no?

Pulling codes would only be relevant if the check engine light were on. It's worth him CHECKING the timing at the very least.

Check your timing and if need be - adjust it accordingly. Use this: http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=IG&P=20 Let us know if it works :)

^- what he said :)

Just make sure the surface is prepped before you paint it. Best thing to do, is use muriatic acid to clean it. Neutralise it afterwards with baking soda and water, and then a rinse after that with straight water. Let it dry, and then all you need to do, is get busy painting :D

And once more, i'm here, with just two other people, and someone who's afk so hardcore, he even entered afk...for some really odd reason. Where are the rest of you?

Andrew Gold - Lonely Boy

Erm, dont pin your hopes on anything physical and ready to go before october :p

Flappy paddle is something i hate, but others might have liked it - in any case, it's not a priority, first up, is the extra solenoid control :)

Aaaah okay! Well then, flappy paddle upshifts will take a back seat then :p

Good to know, thanks IJ :) Just curious, how come you can't downshift?

Well this is the wonderful thing about Geoff - he's considered every possible angle. It's be a simple matter to update the FPGA code at a later date, to add 'flappy-paddle' capability, effectively just go full manual control over shifting, with auto control of the TC Lockup and line pressure (if...

Thanks guys - just what i needed to know! :)

Okay - no need for flowchart stuff - software is underway at last! However, if someone can answer a few questions, it's be much appreciated. We've detailed all the inputs & outputs, which is simple enough, but, the one input we're having issues with, is the speed sensor - now, there are...