Search results

clear ur inbox.

one of the clips is broken... i'm just gona zip tie them tightly on.

yeah i found 3 of them had cracks underneath the boots. Thanks for everyones help! i hope this fixes it. The expoy is drying now.

pictures fixed? edit: also found another crack in the plastic under the rubber boot. edit 2: make that 3 cracks under 3 of the boots.

Pulled my coil packs: Found a few cracks: (just snapped a pic w/ my cell of 2 of the cracks) So basically I just take some epoxy and smear a thin coat over the cracks?

thanks for the input... its freezing raining outside so im gona check the coil packs tomorrow. lol. Bigzavs -- do you think the 6 heat range could be causing my break up? or is it just over time my engine isn't going to be happy w/ the hotter plugs?

i dont have a wideband yet. But i am inclined to believe I am running rich, due to the plugs being black and smelling of fuel. suprahero, are u running NGK bkr6es? I will check my coil packs tonight when i get back from class.

clubna-T has some good info too.

thanks! i gapped to .030. (NGK coppers) i read somewhere thats a good gap for them when u start to run higher boost (which i will be doing when i get this fixed)

i have a 1jz out of a (JDM) supra and put into my supra. all wired up and running. setup: delphi fuel pump FMIC intake open downpipe R154 trans OS Giken clutch stock twins (no boost controller) basically my problems im having is: 1. when i hammer on the throttle it starts breaking up...

i'd like to see sideways shots. drift cars not being sideways makes them sad.

yep, its going to be my drift car. sweet hopefully i'll see you out at summit point sometime this year!

Hey, Just doing an introduction. I've always been a toyota fanboy. I started with an sw20 did 240sx's for a bit -- hated them, and now i went to mk2 supras now on the mk3's. I have an 83 mk2 that i daily. And i just picked up an mk3 from racerpage. I'm having him do a 7mge - 7mgte...