Search results

Here we go guys... These are the results I've found!... I have a 2JZ-GTE out of a newer Supra. Not sure if there is a difference between models though. 12mm Bi hex (12 point) fits but has wiggle room, and I wouldnt want to use this with the way it feels. 12mm triple square fits snug, but...

Weird. Mine is a 2JZ out of a Supra, and it is for sure NOT 10mm... I have a M12 bit, which fits kinda loose. And I have a triple square 12mm bit, which fits snug. I might just go ahead and try a 6point 12mm then

Hey I am trying to remove the stock head off my 2JZ-GTE. The manual says to use a "10mm bi hexagon wrench" which MUST be wrong. I have done some reading and many are saying it is a 12point 12mm. I have also read mixed comments about using a triple square. So, I picked up one of these with a...

About 1/2" yes. More so because of the way they fit into the metal headlight basket, not so much because of the lack of clearance against the rad support when the lights are down (now that the support has been cut). There is absolutely no way to fit these FX-R's without cutting into the rad...

Take off the shroud around the headlights. Take off the top painted headlight covers. Remove the whole assembly on each side (motor and all) Cut and notch out the thick grey plastic casing (on top) Cut part of the bottom out on the metal headlight basket to allow room for where the solenoid...

Projector setup is finally finished. Very happy with the look and the output. Here are some pics... Fitting... More fitting. Had to take out the whole headlight assembly to do a bunch of trimming. The FX-R is a TIGHT fit. Installed... Cutoff line... Cutoff line...

2JZ ftw.. unless you are "UpgradedSupra". then thats a whole different story!

I like the look of a clean 5 spoke with a big dish, but with thinner spokes than the 962's.. So, My vote goes to the 521's

Here is a couple of pics of some progress... Did some test fitting today, had to take the top piece off the headlight (painted cover) and do some trimming and cutting of the plastic and metal underneath. Will have to space the headlights out about 5/8 of an inch forward. And, unfortunately, I...

Is that sprung or unsprung? what is the engagement like? any chatter?

Sorry - I have to ask... I am looking for a set of 1ZZ coils for my 2JZ swap... anybody in this thread have any sources for buying them?

Well, I am probably going to have to space them forward 1/2", and "bend" or "hack" the rad support to make them fit. Is there any real negative to cutting into or bending the core support? Will it really make any difference to the structural integrity of the car? It would be kinda cool to be...

They are FX-R? Too late anyways - you SHOULD retrofit the 7m car as well! I have read briefly on the forums that the Mini D2s fit with about 1/2 inch of clearance behind them to the rad support, and the FX-R are 1/2 longer than the mini D2s. So some trimming of the "headlight basket"? is...

Hey all, Just received my new FX-R D2S projector retrofit kit. Thought I would share some photos of it. I will post some pics as I fit these into the housings - clearance will be tight, as well as some finished product pictures next week sometime. Super excited to get these in. For those...

Anybody have any experience with Stance?

I am not sure of the exhaust housing as compared to a precision. I just know it will be a .91AR divided with v-band exhaust flange.

Well maybe an egay manifold with some modification might be in order. I am able to get the boost logic mani for fairly cheap, but if it wont fit, then no point. I am not interested in spending 1500-2500 just for a manifold either.

I will be bolting on a borg warner 63mm turbo. The 88-75.

Hey all Going to be purchasing a boost logic t4 manifold for my 2jz swap in my mk3. Just wondering if anybody has any positive/negative input they would like to share, or anything i should know before buying such an expensive manifold. Feedback is much appreciated! Cheers

get ready to spend moneyyyyyyyyyyyy!!! :) but its a hobby... so i never complain about the money i dump into it.