Search results

haha, my prosport electric gauge came with no such fittting. I went to napa and they had a fitting but the threads were too short to reach into the fitting... are you sure its 3/8"? http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_832533_-1_10333 or is it 5/8 like the last...

Well after i recieved my oil pressure and water temp gauges i soon found out that niether the oil pressure sender nor the water temp sender swap out for the same size. I found by searching i need a 1/8 NPT TO 1/8 BSPT for the oil pressure but im unsure about the water temp sender. What size is...

cant you use a timesert that converts the size to smaller?

What is the small electric fan at the top left of the radiator for? Ive never seen it turn on, id assume its for the AC or something but i really dont know?

i couldnt find that hole you were talking about, instead i removed the wheel well cover and ran it through the hole in the fender, then into the cab. Why did toyota have to do this the stupid wheel well cover is annoying as hell to work with

thanks. What about the clock?

What do you suggest i do? I need a thicker wire for more current going strait from the battery to the sub in the back.

Hey i recently got an 87 na. The clock almost never works. Itl show a time but itl never be correct, even after ive set it. Half the time when i press the buttons to set the clock itl either go dim and do nothing, or just do nothing. Sometimes itl dim with headlights on and sometimes itl just...

i put my car on my driveway which is very steep, and on ramps. The clutch could barely pull the car onto the ramps it was so steep. I ran the funnel like that with the heater open for about 30 mins, little air came out and i still get the waterfall noise:(

after changine my coolant i could never get the air out of the system, it always makes the waterfall sound and no matter how much i try to burp it, no air comes out

theres those big allen key bolts down in there that lead to the coolant passage, might needs to be tightened or resealed.