Search results

O, whoops. Ok, the Areoquip is the good hose you were talking about Jdub? Those are still AN kind of fittings, right?

IJ, in Jetjock's thread about installing a remove oil system, he actually recommends using push lock hoses.:dunno:

Let it idle, if you rev it and then smoke comes out, then it is the valve seals. If it is smoking non stop, it could be the rings or turbo.

Any Wiring Diagrams?

The thermostat threaded right into the housing? I have been looking for one like that which threads in without having to retap the housings. How did you use the A/C fan's plug? Use the pig tail off your stock fans? It had enought amps to power up the fans? It sends constant power even...

I made the specs on mine in the middle of all the specs. Eight thou on the Intake and Ten Thou on the Exhaust. I have an Excel worksheet that does all the work for you. I can E-Mail the worksheet to you if you want, just PM me your E-Mail. It is avaible on the forums here but just incase if...

Thanks man. I call Pheonix Tuning and I spoke to a guy over there and he said that they use the "Dakota Digital" controller just like DB recommended, so I am going to go with that one. I am going to take a look at your build thread too. I am using the alternator from DriftMotion rated at...

Jetjock, I was asking manily for electrical help, since that is not my strong area. If it makes you any happier, close the thread, I have found out what I needed to know. Poodles, I know about eliminating things. I do it only if I can support it. Example, I eliminated my EGR, since I have...

Figgie, 1) Flex-A-Lite Fans 2)If You Read My Posts, I Stated I Bought The Alternator From DriftMotion That Is Rated At 140AMPS. I am not using a Duralast,(HardlyLast) battery either. 3)How Am I Going To Be Stranded? I Am Not An Idiot Who Builds Crap. I Spend Money On Quality Parts. I...

I want to polish my valve covers but I can't figure out where I need to start besides getting the old paint off. Any suggestions Kenny? Thanks. I would like to buy a Powercoating gun but the oven I need is too large to fit anywhere in our shop.

Radiator and fans should be here tomorrow.

You can use it there and throw a bead of silicone on there. I would recommend on getting an actual exhaust gasket since that is not a walk in the park to do. I always put a bead of silicone on all of my gaskets except the exhaust gasket and turbo gasket for the manifold. I don't put a lot...

DB, I posted I would like to use a sensor in the thermostat housing. I can put it in the thermostat housing as I am not using my EGR, I am not using the Bimetallic valve. I am not a fan of a probe in the radiator. The Coolant stream would be what I want to do or the controller but if it uses...

I built a 7M head myself. Make sure you do it at room temperature or close to it. Also, you will have to torque the caps down and then check the clearance. Also, rotate the cams a full turn so all the valves open because sometimes the shims are not in all the way or oil is taking up space...

A switched that controls it. I don't want to run it all the time because it lessens the life of the fans.

Back on topic though, anyone know how to hook up the Electric fans? Any write ups? Electronics and wiring is what I have no clue about.

O Crap. Okay, that is the number one thing I am taking car of when I work on the car this coming Friday. Thanks for letting me know that guys. I actually have that hose from DriftMotion that Aaron sells but I used it on another engine but took it of before I sold it. I decided to block it...

IJ, You are saying that a thermostat in your oil cooling system is not necessary?

I Have The Tanabe Super Hyper Medallion On My Car Right Now. I Plan On Buying Some Flanges And Making A Straight Pipe To Replace My Muffler Just For Fun Since We Know The Cops Around Here.

I Have Both Blocked Off Right Now, What Would That Cause? I Did Not Know About This.