Search results

There's a big difference between 400 and 500 horsepower. you can probably achieve 400rwhp on a upgraded ct26. 500rwhp requires a lot more money. The cheaper route in the short term is a 7m. If you want to save more money in the long run, buy a 2JZ. I still own a 7m, but if i could do it all over...

I pretty much have everything I need. I bought a precision intercooler with 2.75" inlet and outlets and a 340lph stealth aeromotive fuel pump. But i think I'm going to go with the driftmotion intercooler with the 3" inlet and outlets and the 400lph walbro fuel pump instead. Going to buy the...

No clue. Seth says he's really busy with work and other things. I put a deposit in August, was told I'll receive the parts in December. December turned into April. The bumper was made by Duane (UpgradedSupra) and his company was called Carbonfibrefx. Very few of these bumpers were made. I've...

Well i was using a custom intercooler piping kit. Now for sale if anyone is interested. 2.5" piping all around. I put down 374 rwhp. tuned with the safc. 11.0 a/f @18 psi with a high flow cat. I want a little more power than that so I now have an AEM EMS V1 and bought a precision 6765...

Where did you buy your 1" T4 spacer? I need one.

verify the CPS is aligned properly and check timing. start there first. http://www.supramania.com/forums/content.php?181-How-To-basic-timing-instructions-CPS-alignment

http://www.suprasport.com/Valve-Cover-Cap-Screw-Kit_p_295.html

:: lolsign :: How do you miss noticing it's not a GTE? It says GTE on coil pack cover and the cam gear cover. Did you buy just a short block or a long block with no manifolds, valve covers and sensors?

http://www.supramania.com/forums/showthread.php?151081-Adjustable-front-upper-control-arms

87-88 is a yellow plug harness to ecu. 89-92 is a grey plug harness to ecu. So the answer is no.

you can do the shave on your bumper and not get pulled over if you have this license plate holder. http://swiftmotorsports.com/index.php?main_page=product_info&cPath=362&products_id=1837&zenid=m305891epusq8b5u3nk8b85501 I have it on my car. :biglaugh:

Where did you get the trd racing seats?

nothing for the 7M? i'll buy one if you make one that says "N0JZ-GTE"

The NA HKS exhaust that's on the for sale section use to be mine. I had it on my 87 turbo and it bolted up just fine without any fitment issues. I now have the 3" bic stealth exhaust. So I dont think there's any difference in terms of fitment.

That is the very first shop I brought my car to for previous work. I was not fully satisfied the couple of times I went there. Eshift does good work but they did not follow my directions completely which made me not want to go there anymore. So i looked for another shop and hoped the new shop i...

If you are going all out, why are you using probe pistons? That's just my opinion. Best street clutch to hande that power would be tilton. which is about $5,000. http://www.horsepowerfreaks.com/partdetails/Tilton/Clutch/Clutch_Kits/7.25_Carbon_Carbon/4553 OS Giken clutch is the next best...

What is a safe A/F for a lean cruise?

I have over sized valves, high lift cams, oversized pistons, port and polished head. etc, etc. I cant really say my engine hovers at 14.3 a/f at cruising. its definitely wondering around. it seems more like the stock ecu is fighting the engine to be around 14.7 a/f at cruising. well i got the...

Thanks Julio i really appreciate the help. I will definitely give you compensation for your troubles if you can help me resolve my issues. just need to figure out how to get there.

No. Dont know anyone with AEM EMS. I know Julio (Empera) had one. But he sold it. He has helped me in the past, but right now i am 2 hours away from him. Manny (Boosted Supra) has one. He's in queen's, dont know if it's worth his time to come to new jersey to help me right now. I know manny was...