Search results

When I get the new setup done I will be taking temperture readings from pre and post intercooler I already have the unit required to do this just have to wait till the new setup is done.

my old set up is the spearco/CT 60 trim when the car is going again it will be a bit different turbo/pipes/intercooler set up/intake so I cant just swap out intercoolers if I was retaining the same set up this would be feasable sorry.

man I dont miss fuel cut, nice kill by the way oh ya thanks for selling me the rebic LC

Ok I got my new intercooler (ssautochrome 12x24x4")the other day for the FFIM I will be building soon I was curious how it flowed against my current setup (spearco stock replacment) I also brought along a stock intercooler for comparison to see how bad it really is these tests were done on a...

I have the LM-1 very nice a unit for those of you using the zetronics unit can you calibrate this unit? my friend has this and we checked both units back to back and the zetronics did not pick up a lean spot (18-19) at high RPM in his turbo high compression celica he was unaware if it had the...

I think he means a solid rear diff Titan has them for the MK4 but Im not sure who makes them for the MK3 just buy a 2 way rear diff Kazz makes a nice one and its probably the same price as the spool but still streetable.

1989 Turbo -Ft.St.John B.C. http://www.cardomain.com/ride/617668

the rear are softer than stock spring rates I had problems with the rear bottoming out.

we have Afms (air flow meter) not mafs which you should not clean other than with a cloth no solvents!

I have yet to get that far on my project I cant see it fitting since it is a fair bit larger I will not be starting this till after x-mas Ill post my results then.

The throttle body off of a 1UZ (lexus v8 70mm))is larger and the TPS plugs in to our harness and they can be found for cheap I paid 55$ for mine you can get into the 12s with an upgraded CT26 60 trim with a set of drag radials 400ish hp

Yes I would also be interested

Check out this website/forum alot of usefull info Epoxy resins are the product you are looking for. http://www.fibreglast.com/phpBB2/

What program do you use Grim I would like to be able to do this

Thanks man it was alot of fun we are currently working on a plug for a set of side skirts and a few other things

A poor screen capture of me and my brother our last day of insurance before we parked the Supras the vid is in the show off section.

Get a fuckin life go to the OPera website

Wow that what a dumbass

Yellow Konis are some of the best struts you can get Ive beat mine for the past 6 years and they have held up to my abuse. As far as springs go im not sure about the B&G springs but stay away from ST springs they are softer than the stock spring rates Eibach make a nice set that are firmer than...

Ya luckily it was only 5 blocks from my house and after my bro and I ducked into my shop and parked the cars Its a good thing I lived pretty close theres not much left of the tires radials are starting to come through I was enjoying the line loc a few days before I had to test just to make sure...