Search results

I have used Trend Micro's PC-cillin for the last few years. I highly recommend it, They have a free trial version also... $24 per year and it updates a few times a day. All in one...

That looks like fun Shaeff... :) i wish we would have got some snow this year...:(

Keep looking.. It's called an outlet pipe for a reason...There is only one outlet on the oil pump that supplies oil to the block. That is it...

^^^You... well your 2nd bill picture... LOL

Its has been stated here before. All supras are different, Put some faith in Ian as he is not trying to mislead you, he is trying to help you. 4.8mm OR LESS!!! Why, cuz he is a fart smucker...;) I agree the other thread was tad misleading. But the point of it was to explain that there was...

I had this happen on a car i bought with a flush luglock, I welded a nut onto the end of it, It came right off from the heat, If you do this, Tape your rim off first if you dont want to screw up the finish on the wheel..

ABS solenoids?

I guess I agree, I should have said most air tanks don't have the balls to run the 1/2 drives, or the bigger ones..I have never tried an electric one tho...

Buy some of these and take them with you.. http://www.kteller.com/store/product_info.php/cPath/23_106/products_id/586?osCsid=bbe25472702c3dc375bfb34908cc9ea0

Most air guns are 1/2" drive and don't have enough balls to get them loose. IMO 180-190 ft pounds is just to tight for them.. :(

Ohh your screwed...LOL Just Kidding..:) .All i can think of is trying to get the flywheel from turning somehow, and a bigger breaker bar... Or take it to a shop that can pop it off with a 3/4 inch air gun for you. I am sure someone else will have a suggestion for you soon..

Use a half inch drive socket on the biggest ratchet you have. Now slip the end of the ratchet into a long 3 ft steel pipe, Now, position it so the wratchet and breaker bar are under the car with the pipe pointing towards the drivers tire resting on the ground, Then bump the starter with the...

I would not, I would send it back if it is bad.. Put up a picture and it will make this easier i guess?

LMSS: I see you have your priorities straight..:) Supra gets the garage....Good Job!!

Yes they work well, but be carefull to not apply to much pressure so it will not create heat and burn through your paint job.. :)

Bummer, It's hard to tell from the pictures, but it looks like some of that may buff out? But dont do anything to it untill the insurance looks at it... edited: Sorry i didn't read the part about cracking... Make them replace and repaint if needed.. Goto the best shops around.. Stand your...

I would say a few of you have way more than just too much time on your hands...eeeewwww... lol

Actually the paint should be like new under the pin stripe, The exposed paint should be faded if any thing.. Try to heat it up with a hair dryer or heat gun and get an edge lifted with a razor blade, then use the hair dryer to soften the glue as you go, Then use some rubbing alcohol to remove...

I use it, I was actually impressed for the price. I plan on forming some 1/8th inch steel and weld it around the top to stiffen it up on the ends.. Not to mention how easy it was to pull or push the towers in and out by adjusting the bar tension... Ok, that was shock...

Pirates are timeless... :) A pirate is one who robs or plunders at sea without a commission from a recognised sovereign nation. Pirates usually target other ships, but have also attacked targets on shore. These acts are known as piracy. Unlike the stereotypical pirate with cutlass and masted...