Search results

Alright guys, its that time of the year again. Location will be Belmont Plateau located in Fairmount park right off of i76. We will start meeting around 11a-12noon. Hopefully i will be able to be there before but seems little tough. Here are some directions and a map...

because of what he said here. http://www.youtube.com/watch?v=co3Spcq6Uzs discuss

well since i couldnt figure it out and after swapping the harness and still have not solved the issue, i've decided to pretty much make my work wiring harness to go with the AEM. I will only use the things i need. So i have a few questions for you wiring gurus and hopefully i can get the car...

ok after a LONG time of having the car down after lifting out the engine and changing the timing belt, crank seal, exhaust manifold and tapping the oil pan, i ran some tests to see why the car will not start and have concluded that there is no spark in coils 1-6 and 2-5. I have swapped out the...

im in the process of getting a Box Terrier and was wondering wat u guys thought of them wat kinda of experience do u have with these kinda of dogs. My last dog was a lab/golden retriever mix and it was waayyyy too hype and playful for its size. Will post pics if/when i get him.

i want to buy my brother a Chelsea FC jersey but i dun want a cheap POS. I found this from ebay and i wanted to know if its an official one and not a fake. Even though this seller is in Malaysia, heh...

ok so i manage to snag one for...practically nothing, it runs, drivable has quite a few problems but i can really complain. It was suppose to replace the honda but looks like it might hafta be just another project. So ima need any input you guys may have, anyone here own one? I think i will let...

welp...it wasnt where i parked it last nite so i would say it has been stolen. here are some pics. She never let me down :( she will be missed.

i have some questions about it before i make any more decisions. I want to know how easy it is to install and how easy it is to make it work using speed density. im still not sure where things would connect such as the boost controller and the map sensor since i havent really seen any good...

ok i figured i will post this once more maybe someone will have a clue or maybe my car is just possessed. the story goes... a few months ago i decided to do a bunch of things to the car all at once (bad idea) which included a new t4 exhaust manifold, a new crank seal and timing belt, and the...

so i've been seeing more things compatible with the 89+ than the pre89 ecu's and stuff, so i was wondering if i can switch over from the pre89 ecu and wiring harness to a 89+ wiring harness and ecu? would i need to change anything else? thanks. -emp.

so i tried installing a vpc in the car, hardwired, but i couldnt get it to run correctly. i have a suspicion that the vpc rom chip might be wrong, all i see is E164 written on it. The guy said he is positive that its the right 550 mk3 chip but im not sure if thats true. What else could be...

supposably they are .20 JE's...rodknock on the #1 rod. car was ran rich as hell reason why theres so much build up. wondering wat u guys think... i have new rods to put on them if i do decide to reuse em, depending on wat some of u guys say.

looking to get a lcd screen to use with my laptop and my headunit, so basically it must have a vga input and a rca input. It doesnt need to be touchscreen but it doent matter...need it to be around 6" diagonal. Any ideas? i would try the psone mod but im too lazy to take one apart and solder it.

need to find the plug that goes in back of the gauge and then to the o2 sensor...i cant seem to find one. I bought a used gauge off someone but it only brought the power harness. Anyone have ideas on this? model number 30-4100. thanks, -emp.

Please PM me asap. Thank you.

got one from 935 with a real 10lb tial spring. anyone else running these?

by popular demand, the next philly supra meet will be a Dyno Day. Im thinking of having it at Rttuning (rttuning.com) up in lansdale, pa but im not 100% sure on that. I will be emailing them and get some prices. Not everyone has to participate in the dyno but will be nice to get a good amount of...

:1zhelp: need to find a pre89 field harness that i can hardwire my map ecu, i have a 89+ field harness i wanna get rid of too. if u can help lmk.

Im thinking of switching to map ecu, but i have a 87 and i havent seen any pre 89 harnesses for it...are there any other there? if not is there a way i can make this work? If not i will probably go with maft pro, even tho i dun feel like dealing with all them wires. ANy input would be greatly...