Search results

Yes the engine is in the car but I'm a have to drop the pan & figure this all out b4 I go any further

Thanks!

Would stock oem replacments have 020 stamped on them? I'm not sure.

This is the driver side. Broken clip which is allowing water in... Doing one pic @ a time due to using iPhone.

This is the good (passenger) side of where the front of the targa sits.

Unfortunately I can't since the head is on. But with help from this forum & more research these seem to be wiseco 020 pistons 9.0 compression -16cc dish & 83.5mm bore

Oops. Wiring is a bad choice of words. It is a manual controler. I have a diagram here from online... shouldn't it be the same basic setup for my 7m

Wisecos... Thanks for the info. I'm a start doing some research on these

Anybody have a wiring diagram for a hallman boost controller? I think I found one online but it's for a evo setup. Would it make a difference or is the setup the same? I have a 7mgte

Does anybody have the wiring diagram for the safc. I'm trying to wire it to a 87 7mgte. Thanks guys

Well the head was definately machiened but the block wasn't. I spent about an 1/2 hour checking to make sure the block was straight & then an hour sanding down the surface with WD/40 & 400grit sand paper. The block is smooth as glass, I know it shoulda been Machiened to Be safe but we will see.

I'm not too sure about pistions but would "020" dramatically change my compression. I've done a Hks MHG 1.2 with arp studs & The head has work.

I purchased my 7mgte with a bhg. When I took the head off these pistons were in the block. They are definately aftermarket because I haven't seen these in any other 7m & I've seen 3. There is also "020" stamped on the pistons. What's does this mean? Is anybody familiar with these pistons?

My taillight seals are not leaking... It's definately coming from the bottom rear window seals.. They look tattered & torn... I'm going to take a picture of the targa tomorrow to show you guys what I'm having trouble with. And thank you for ur time & help!

I'm having some issues with water entering my vehicle. 1. Does anybody know the part numbers to the hatch window trim? I have alot of water leaking into my trunk because of the deteriorating window trim. It causing pools and rust issues... 2. There is a small clip on the driver side, front...

Thanks guys.. I go on supramania from my iPhone so next week I'll post pics up from my comp.. I wonder if the new SM version will be iPhone friendly..

Whud up supramaniacs!! I'm the proud owner of a red 87 targa supra. Owned the car 3 years ago but sold it to a friend becuase of lack of $$$ on my part. Pls I was being cheap (HG kept blowing & I wouldn't buy a MHG). My friend moved away and wasn't able to fix the car. I watched that car sit...

So the Lexus afm replaces the need for a PFC fcon system?

These are sweet. I'd definately buy 2 pairs when available.