I usually check mine by putting a tennis ball on the inlet side of the turbo to block it off and disconnect the rubber hose from the 3000 pipe. loosen the other clamp on the same rubber hose to turn it so I can blow into it.If no air passes through you have a good seal. most of the time your...
Hey guys. Could I rebuild my ct26 my self. Because I blew one up already and tore it down. So I pretty much know were every thing goes. Also do I have to get it balanced to.
I have custom hard pipes from turbo to TB. I dont have turbo elbow but i only loose about 2psi of boost at 6000rpm. I have a sunpro afr guage dont really know if it is wideband or narrow it was gave to me bran new by a friend. I dont know what my torque is but i drag race it at Atlanta motor...
I have a modded afm. I drilled out the adjustment screw hole and backed the screw out. Thats how i am running 15psi of boost. I do have a afpr set to 40psi . I also save a AFR guage. Accroding to it i am not running lean. But it is wired into the stock o2. Also how much rwhp do u guys think i...
Waz up guys.I have a 89T I have all mods done to intake exc IC.I have 3inch exaust from turbo back. I also have warlboro in tank. I am running 15psi on stock turbo. dynoed at nopinationals at 243rwhp.If i use 550s on my setup will i be over 300rwhp.
Waz up guys.I have a 89T I have all mods done to intake exc IC.I have 3inch exaust from turbo back. I also have warlboro in tank. I am running 15psi on stock turbo. dynoed at nopinationals at 243rwhp.If i use 550s on my setup will i be over 300rwhp.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.