Search results

yep, found oil return line not bolted down tight enough. were can i buy new injector grommets??

i got it running! did the 12v mod and walbro pump and it fired right up. only thing is i had a ton of oil come out on the turbo side, i think when i had to remove the turbos to install the y-pipe i did not get a good seal on the oil line to the turbo, so i need to go back and find out whats...

sprayed some gas in the TB and it fired up for two seconds! i am going to do the 12v mod as soon as i can and see if that works, man i hope it does!!!!!!!!!!!!

today i tested all the injectors with a noid test light and they are working, also tested for spark and thats good as well!!!! so... i guess i will do the 12v mod and instsall my walbro and a new fuel filter to see if that works. its crazy there is no fuel inside the cylinders or on the...

Jono - I will get a node light today and check it, and I will check for spark as well mattsplatt- I never got the message to contact mark at PSI, inbox must be full, how do I find him, just google PSI? Thanks for helping guys, always a bummer after so much work it won't start! Oh ya, I...

the starter spins free and then will make a loud clinking noise when it catches, i will put up a video of what it sounds like. i will try the screw driver trick as well. is there something i can check on the ecu with the volt meter to check things? also it semms strange to hook a...

checked for codes and there was none stored. what are some other ways to check to see why my injectors are not getting signal? thanks so much guys!

i just finished the swap and when i went to crank it without the efi fuse in to get oil in the turbos, it turned over fine the first time, but when i went to turn it over again the starter just slipped and then i heard it click like the gear grabbed. went to start it again and it turned over...

ya the silver one with no filter, i have no clue were it goes and dont have anything left to hook up. i did remove a bracket with a vac line on it but it was just capped off. and the line was to short to hook up to the manifold.

Sorry Jon, lol. I'm using the jza70 cable for now, but I will get one from the camry asap! Thanks for everthing were dose this vac line thats highlighted in red go to? its the last of them and then i can start the car:) found it hideing next to this one, but i dont know were this blue...

whats the other vac line for in the red circle

why is this in the 1jz 2jz section?

got everything hooked up and ready to go, only thing left is gas, new oil, oil filter, red line coolant, fill up power steering and hudro fan res. i should be stating her up in the next day or so!!!! here is a couple more pics of it, ill put up a video of me starting it up for the first time:)...

got everthing hooked up! thanks for all the help juno:) i will put up a video of it running soon. for now here is a couple of pics.

^^^^^who is IJ? LOL ....... good one.......

alright! starting to understand what needs to be done:) also found these in a box, are they usefull? i have the alt. all hooked up. juno, you are awesome. thanks for helping me out so much. i cant wait to put upp some video of this thing driving down the road!!!!!

wow, good luck....... dreams can come true you guys! but keep dreaming man.

huh, so stuff is hooked up wrong already. can someone put up pics of where things are suposed to look like and what hook up were. just so i know i am on the right track. that would help out alot. so were does the hose from the res on the driver side for the power steering go to, if it...

what do i need to do to get these lines to hook up? i know one goes to the hydro fan and the other goes to the oil cooler. this is were i need to hook up the high pressure line right? so i need a high pressure line or a low pressure line? when i went to the parts store they wanted to know...

it is a black box about 3in big, it has RELAY CLEANER CONT. in the front of it. i think your right about it being for the head lights. here is a pic of that plug. do i cap off the vac line by the diag. box if im not using the charcol canister, and what else do i need to cap off when not...