Search results

i have GOT to get me one of those,just as a conversation piece. then of course the conversation will start like,"What the f@&k is that?"

no yellow trim so it can't be made by Honda

thats part of the reason i went to elc fans got rid of whoooooooooooo now its just whirrrrrrrrrrrr

time to do some clean bodywork

What would it take to make this block work as a 7MGTE? Oil squirters,different pistons and what else?

Now does the heater work off of coal or wood? Custom tail light!

low freon will shut the system don. making it work might damage the seals

that grill is petty hideous

make it a mac

check ALL fuses,under the hood,by the "easy access" fuses in the kick panel. check for continuity.

MAHOIDAS = My Ass Hurts,Oh I Drive A Supra

i have my permacool sensor going directly into the radiator fins and it is hooked to a relay for the fans. works awesome,and will be even better when i finish the aluminum shroud. i wonder if the other drivers who had problems had a shroud installed or no?

now what temp is the vagina? i went from a perma cool set up,back to stock.it failed miserably,and now i'm going back to elc. with a aluminum shroud .got a new clutch fan and blade for sale too,both new,less than 30 min on them.

Dam I hate messing with things that are working right,just to "try" and make the work better. Usually ends up failng and causing damage that would that would not have been there if I would have left things alone. Case in point. Browsing through eBay a few weeks ago,I came upon a mint fan...

That's the problem with frames that have the name of the car on them. It's like durrr,the names on the car too!

And the car was running fine before the fan install.

I think I screwed mine up. I took it off and decided to clean the inside due to nasty looking varnish deposits. Took out the meter carefully and set it aside. I smoothed out some casting marks on the inside of the AFM housing,and semi-poloished it up with some fine steel wool. And then I rinsed...

the vid to 'it"s version of alxe f was cool

Dam,that was the best explanation of a problem i've ever read!

yeah,had to disassemble the whol block just to get it our,strange the others were'nt bolted in