Search results

I just finished my swap. I changed EVERYTHING rubber on the motor. I dropped the pan and cleaned it out and resealed it with FIPG ( form in place gasket from Toyota). I did three 7m swaps and a few SR20's. I learned from those to do everything first. I would replace the old grounds with newer...

^ Sorry I was having a momentary lack of reasoning and recently came to my senses and gave it back. Thanks Ron

cant wait to Run on the interstate in MEXICO next May Kenny

My injector's are loud enough to hear with the hood up. Did you trace the wires? Are all of your injector's not powering up? If I am not mistaken they are on three different sets of wires from three different pinouts 10,20,and 30 . They are 1-4,2-6,3-5 . So I would assume that if all are bad...

Holy Shit it has been forever since I posted in this, Well the 1JZ swap is 99% finished. I drove her yesterday. I had a little issue with the COR relay not working. In 92 teals write up it says nothing about wiring in the red and black wire on the B1 plug for switched 12v. I wired it into the...

Ok I need a switched 12v supply to give power to the positive side of the COR relay, I am swapping a jzx90 ecu and harness. I grounded the cold side I just need a good key on 12v supply to give the circuit power. I am searching and I will keep looking just casting a broad net ---------- Post...

92 I think I figured it out it, does it go to the starter? I checked the TSRM and it shows ST1 going to the relay. The ST2 only has a 12v current when you move key to the "start" position. http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=038

on the ing switch there is a brown and red wire with the label ST2. it terminates at the connector to the firewall body harness. I cannot seem to find it in the TEWD or by searching ST2* in this or on SF. any ideas?

I recently finished my 1j swap, I have a bunch of Junction Boxes from a different clip. I was wondering if I could recycle a J/B to house the relays for new systems such as Efan's relays , HID for light relays ECT. I just don't want a bunch of relays mounted all over the place,but rather a...

I have a 2j pump from a gen 1 gs300 I used they 2j pulley and it is perfect. It is exactly perfect. Is the pulley on all the way?

Thank you for the pictures, how much was this set up?

Ok cool, that makes two of us LOL.

I have a Fluidyne ALM Radiator, It has the stock provisions for the Aux fans and the factory fan shroud. I have finished my 1J swap and will be running E fans. My question is. Will the Mishamoto twin fan set up with Aluminum Fan Shroud bolt up to my Fluidyne rad? If not does anyone have a...

I saved this, I have this car with the exception of sport roof and a 1j and of course miles . Might make for a good way to establish worth to insurance if the worst happens.

I just had my RHD mirror glass replaced by a good auto glass shop. Now I have USDM function with JDM power folding

Welcome, Congrats on the engagement.

We got about that much from my deceased father in laws VIP account, we paid off all our bills, All credit cards are gone and only have mortgage and two car payments. Figured we would get more over the long term with out having to deal with high interest rates from Credit card debt. Short term...

yeah I live in the middle of a few orchards. I get ALOT of bee,wasps,hornets here I pretty much buy killer spray at costco

Carbon Fiber based JDM powerfolding mirrors with USDM spec glass.

I need to get my dick kicking shoes..... Actually there is Mike Lavallee in Snohomish http://www.killerpaint.com/about.html