Search results

Measure before and after?

There are some pictures on my site. I haven't changed mine but I took out the gauge cluster and diagnosed the problem http://mk3supra.com/?p=21

Lexan or cf targa would be very cool

Don't quote me but stock headgasket is 1.37 mm compressed I thought. Since you took off .6mm and you have a 1.9mm hg that should keep you right around stock compression.

Wow you have given me an appreciation for the MR2

Make sure you are careful if you are using any sort of persuasion. You don't want to damage the turbine or compressor wheels at all.

I think it would be in your best interest to block off the hose running from the canister, gas fumes under the hood might not be the safest thing

That game gear went through double a batteries like no other

you really should be using a 19mm socket on a 1/2" drive breaker bar. I broke a ratchet trying to use 3/8"

Note the positioning of the the compressor housing: this show shows the oil This shot shows where the dipstick was bolted to This shot shows the top water cooling portion. It looks like my housing is situated different

For those that are interested in the starlight scope I have. It comes in this cool box. It's straight out of the soviet union, very cool history It came with all sorts of accessories, original manual in russian, big battery pack, carrying case, and different cams so that it can be...

It's not the link your looking for but I put up a lot of pictures on my site to help with reassembly, and it might help you http://mk3supra.com/?p=59

is the bar long long enough to connect with the frame at all?

I'm doing somethign similar. Disconnect the lines going to the compressor, and then theres 4 bolts that hold on the condenser, take that out and the lines that run through the firewall can be disconnected as well, on the exhaust side

obligatory TSRM link http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=CO&P=6 they look all to be the same size

With the transmission and flywheel/clutch off I was able to mount the engine to the stand. With the head still mounted to the crane I slowly let it down, and it looked like the stand was sagging a big. I didn’t want to risk it so I left it on the crane supporting most of the weight of the...

My friend had a 50 beowulf upper. He let me shoot it and it kicked hard. It was cool, but not something I'd want to own. I had enough shooting it 5 times.

Mine does this too, infact I think I can start the car without the key lol

That's why I asked because I've read conflicting opinions on it. http://www.supramania.com/forums/showthread.php?125853-Freeze-Plug-Warning-Don-t-replace-unless-absolutely-necessary

This thread says otherwise. I just want to make sure I do the job right. If I doon't have to change the freeze plugs I don't want to.