Search results

  1. zachm611

    Ongoing issues with starting

    well you could always disconnect a fuel line for a few secs to see if any fuel is going to the engine, also the knock sensor will make the car drive very poor like there is no acceleration at all. good luck though.
  2. zachm611

    wont idle below 1100-900 at opperating temp

    51 is also TPS related, i would check the wires to make sure theyre not corroded or anything, it could also be a vacuum leak. good luck.
  3. zachm611

    No power

    were you able to drive it back from the shop? i would think after a few drives or whatever it would throw new codes..also i would check your timing, my dads old truck after it was rebuilt the timing was off and it felt like it was under a heavy load though it was just the 2 of us in it. anyways...
  4. zachm611

    wont idle below 1100-900 at opperating temp

    is the idle steady or does it bounce a little?
  5. zachm611

    lmao look at this cheeto

    haha you got that right.
  6. zachm611

    lmao look at this cheeto

    so i was eating cheetos and this one came along... and well take a look at it lol i was like WTF... its pretty funny... or maybe im just tired...or bored or both lol...some cheeto is obviously happy in that bag...
  7. zachm611

    No power

    kai is probably right, when i first got my car running it ran like garbage and idled like garbage, due to bad hack job on CPS and coil pack wires, also after i noticed i had a fuel leak i changed the injector orings and saw that my injector #6 wasnt plugged in, and my knock sensors were...
  8. zachm611

    looking for an ISC valve

    http://www.supramania.com/forums/forumdisplay.php?f=58 go there and make a new thread... however i might have one laying around in the garage somewhere
  9. zachm611

    Idle jump?

    ISC maybe? does it do it constantly like up and down up and down like pulsating or what?
  10. zachm611

    Pictures of my car

    thats not just pretty its hot very nice clean car
  11. zachm611

    Car won't start =[

    bad terminals or corroded wires maybe?
  12. zachm611

    What does your Oil Pressure Gauge read at idle?

    my idle is around 30 when warm but when its cold its about 15ish id say, ive heard the 7mgte is a low pressure high velocity oil but i dont know, i always wondered about it but thats how its been ever since i got the car running, maybe someone that knows more will have a better answer.
  13. zachm611

    dam bird

    yeah when i first got it, the headgasket was gone.. there was gooky sludge in the overflow, dirt and every other thing you can imagine, tons of mud under the car...hacked wiring harness lol it took a lot to get it running only to end up changing the headgasket, a new radiator, fan blade.. the...
  14. zachm611

    spark

    when i first got the car my no spark issue was very bad CPS wires
  15. zachm611

    dam bird

    just as i was having a good time laughing at other people talking about that stupid light mine decided to turn on, and my rad is full and i put some water in the overflow and it still didnt go away.. could it just be the sensor stuck or? any suggestions are appreciated, thanks, Zach
  16. zachm611

    stock turbo pipe/hose -> intercooler

    i got a radiator hose as a temp replacement from autozone.
  17. zachm611

    Car won't start :[

    get it running and take it to autozone or any auto parts store and have them hook up a tester, its free and they will tell you whether its battery or alt. good luck.
  18. zachm611

    overheating... help please.

    i had overheating problems with no signs of bhg but removed the head and found the hg was bad i also replaced the radiator at the same time. but before that i did the tstat (to my surprise there wasn't one), rad cap and every other simple thing even flushed the radiator and still overheated...
  19. zachm611

    waterfall sound

    ok i was just checking, cause i bought my car and previous owner said it was rebuilt but it didnt really seem like it after i had bhg and got to look inside, the head looked like they tried to use a belt sander lmao. anyways good luck with the burping
  20. zachm611

    waterfall sound

    did you rebuild the engine yourself?