Search results

I installed a used apexi tt with harness, and an amp today, and when I started it back up, it idles at 500 rpm...I have since disconnected the amp, and battery but still same idle. I didn't hook up the o2 feature with the tt, that requires you to tap into one wire on the ecu; I just connected...

Well, somehow I lost ONE of my 12mmx1.5 slim, 12mm hex head lug nut for one wheel, and am having no luck finding any lugs of this style online for sale. (see pic below) Anyone have any suggestions, or have 1 sitting around that I could buy? lol. Thanks

i want to upgrade my 1jz pcv valve with a 2j, and the only one listed at the auto parts store was for a GE...will this do?? i would go to the dealership, but am far away from one right now. i'm just unsure if there is a difference between pcv's when boost is added to the scenario... thanks

even on 50-60 degree days, before my 1j reaches close to NOT, or has run for 3-5 minutes, it sputters out horribly when the turbos start to spool. Under 2500-3,000 rpm, the engine runs completely normal, accelerates fine, and then sputters when it reaches + boost. now when it is a really...

I am looking for a nice leather shift boot, either in all black, all blue, or blue stitching on black. Any suggestions? I think I need an aftermarket/universal boot because my shifter is an inch or two forward with the 1j r154 BH compared to the 7m r154, and it seems like it would stretch...

Trying to find the right size replacement weatherstripping for the rear hatch. I'm planning on buying some universal replacement stripping from jcwhitney, but am not sure of what dimensions. Here is what jcwhitney has; the first one looks pretty good (ZX132565N)...

(taken from older post by fiyota) I am building a harness for my power folding mirrors, but I need a little help figuring this schematic out..I've got the switch and computer, and I know the wire paths, but I need help with the symbols and such. What power do I use? Do I need a new...

I messed up the threads on my column a bit, and in turn messed up the threads of the nut. I want to get a new nut, anyone know what size? Thanks

i am about to install an 89+ wing on my 88, and was wondering if there are any templates out there that i could get a hold of for drilling the necessary holes. maybe there are some specific measurements that can pinpoint the holes? or is it more of a line-up and guess kinda thing?? thanks

i am trying to diagnose an exhaust leak, and think its somewhere in my egr system. i want to disable the egr, and also remove what i can from the mess of vacuum lines off this engine. so what can go and what has to stay, and what gets re-routed?? i am going to post a pic tomorrow of what...

will a 2jz fuel rail bolt onto a 1jz manifold? are the fuel line fittings the same at the end of each rail? thanks

what has to be done to make the 89+ rear tail lights work? any harness cutting or just drop in? how does the '88 antenna compare to the '89+ setup? will my 88 hole line up with an 89 wing? can someone reference me to an install guide for the lights/wing? i tried searching but i couldnt...

has anyone put a stock 2J IC with piping on their mk3 and have some pics?? mine would be from a '94 tt. trying to get an idea of how it would work, if it works... thanks

my headlight switch has no clicks to it, just flips on/off real easily. the switch on my parts car works great, but after getting in there and taking the steering wheel off, it looks like the whole assembly with turn and wiper controls is wired together and runs down the column without any...

My power steering pump is dumping fluid and I want to ride without it until i get it fixed...Can't find any listings for a 2j belt without p/s. I could do without the a/c now too, so I either need the length w/out p/s, or without both p/s and a/c. thanks