Search results

If you pull the engine and machine the block (with rear timing cover) to a mirror finish you could go with a metal head gasket... It would be worth it..... But more expensive and time consuming and not needed at near stock power levels just straight edge the block to check it Pulling out the...

That looks awesome you running cop? Those look really close to the plugs.... Do you even have plug wires?

Thanks I an not sure who made it I bought it off of wardog

.. Double post

Yes it has 3 vr sensors I am using 2 of them NE (24 tooth wheel for crank sensor) and g2 (single tooth for cam) the grounds are all tied together in the cas its self I connected my harness to a stock plug matched wire colors to TSRM and verified that those were correct with my meter

No faith!! :-P if it's possible to wire the air temp sensor backwards then that's a possibility;-)

As far as wiring goes Just down to injectors and finishing coils(got to mount them somewhere) And a couple wires in the cab

Yes do it once do it right look up the thread Pyro suggested If you want to do it right and cheap you can use a felpro or Toyota hg and ARP studs torqued to 76 ftlb CHANGE YOUR Oil and filter. get your head machined it doesn't have to be expensive if you are not looking to make tons of power...

No that's the front leather cover that protects the bumper and radiator.... His mechanic removed the radiator and painted it black for protection :-P

Hi This is a very rare to find legendary supra, is a v6 cylinders in line 3000; stick shift ( 5 speed+reverse) it has a sport roof (like having a convertible) the car has 163,xxx original mileage, nothing for these perfect japanesse machines, (they last forever) they not making these cars no...

Rotflmfao v6 in line 3000 Sounds like a bmw Like a convertible..... Everything about the ad is awesome......... Now that I think about it I should paint my radiator black for protection

Do you have a rough idea of what you will be asking for it?

Got about half the wiring connections complete Tonight :-)

Edit: I understand what your saying now

Did you free air calibrate the wideband when you installed it?

Yeah we do!

Thank you sir:-)

hey this might sound stupid but i cant figure out how to wire the tps.... ms3 wires: tps sig(pin 22),vref(pin26), and signal ground(pin 7) tps: e2,idl,vta,vcc

Awesome I have a yellow top optima

It'll happen quite a few times in the next couple months.... Once you are running again come on up we get together once every week or two I plan to have my build driveable by the Chehalis meet in may that is one you should try to make:-)