Search results

  1. C

    ct26 360 thrust bearing

    just got off the horn, it looks like ill be more than likely going Garrett t3 turbine with a 10 degree clip (still trying to decide). MDC, do you have the BB section? If so ill probably do 12.
  2. C

    ct26 360 thrust bearing

    360 thrust bearing manufacture http://www.turbotechnics.com/docs/components/360.htm
  3. C

    ct26 360 thrust bearing

    ive general heard good things about clipping, especially when done by PT. I've read numerous stories about turbos they build living for 30,000+ miles. Its funny because today when I looked at my packaging, i noticed that it was shipped from PT but was sold under a different name. The T3...
  4. C

    ct26 360 thrust bearing

    WOW, lots of good info (im going to have to jot your equation down for future reference Doward). How can I induce lag without inhibiting exhaust flow? Im assuming that all opinions were made based on stock flow, 14 degree clipping was recommended. I am learning a great deal about this turbo...
  5. C

    ct26 360 thrust bearing

    the imbalance issue may be corrected by the thrust bearing since to my understanding is its job. The 360 is supposed to hold the shaft centered better than the 270 wants to be from what I understand. For flow, im still working on what im going to do with that. But inefficency is already know and...
  6. C

    ct26 360 thrust bearing

    I know, thats not what im going for with this setup. I have T3/T4 61 trim turbo, but thats another project. I also have acess to a MP super 70. I know those two will make power, and I know to expect 550+whp w/ the 61 and i know to expect 650whp+ with the MP. I plan on having four different...
  7. C

    Forged pistons for $350 new

    sorry to bring up an old thread, why dont 7m owners use arias? i know a few people who swear by them, one of them being a fellow 7m lover. he swore by them.
  8. C

    ct26 360 thrust bearing

    some measurements would be nice as well
  9. C

    ct26 360 thrust bearing

    if you can give me those, we may have a debate.
  10. C

    ct26 360 thrust bearing

    whats the weight of a stock ct impeller, the 57, 60, and 62?
  11. C

    ct26 360 thrust bearing

    probably, oh well. the cost of pushing the limit.
  12. C

    ct26 360 thrust bearing

    yep
  13. C

    torque plate 7m

    Is there anywhere to buy these new???
  14. C

    ct26 360 thrust bearing

    im going w/ a 67mm compressor.
  15. C

    ct26 360 thrust bearing

    They do: http://www.gpopshop.com/upgrades.html I called them up a few days ago and they said its a go. PT also said that a company in england or someplace makes them but they had no experience with them.
  16. C

    ct26 360 thrust bearing

    Anyone used one? Im looking to get my ct upgrade done in the near future and I hear these are supposed to do a better job of holding the shaft steady than the stocker (and hopefully extending the life of the upgraded ct). I talked to PT today and they said the never used one and the stocker is...
  17. C

    torque plate 7m

    make one for me and ill pay!!!
  18. C

    Tremec swap & others....

    why would I want to use a W58 clutch when most are weaker than the r154?
  19. C

    Finally Dynoed

    im looking to get the lipp elbow soon, I did take %10 out on top and I gained 20hp on the top end. I'm still rich though, maybe some afpr adjustments next time around.
  20. C

    Finally Dynoed

    the wideband was shot due to some guy using race fuel earlier that day so no widband for me. :3d_frown:
Top Bottom