Search results

Is it alright to bypass the throttle body, with the coolant hoses ??

I took off the sensor and didnt pay attention where it was located in the screw holes. Should it have alittle tension on it to open the butterfly some? I was in the middle of trying to adjust it when I found that oil leak from the HG job I had just finished. I had a vacuum leak, so it was idling...

Going to dealer to get that FPIG, sounds like it will do the trick, will keep ya'll posted. thanks all.

sorry fellas for my snappyness, I just dont want this thing to lead on my 2nd go round. I did spray that Copper Spray on HG before I installed it on block. I used a nonhardning RTV (Black Stuff), definitely should have used something that hardens.

This is on a 7M turbo engine and I did use a headgasket, give me a break.

This is the best way I know how to ask an intelligint question. Please tell me how I could have asked this question any better that I did. Look I just did alot of work that went to hell with this oil leak. Please exsuse me if I didnt meet your standards how to ask a question.

Which RTV do you use in the corners of the block for a HG job. I used the wrong one, boy want a mess !!

Is it alright to bypass the "J"-Tube on a stock 7M ??

What sensor controls the small fan just left beside the radiator water pump fan ? I have never seen it run before.

Was reading about a "12 Volt Mod", so it made me think that the stock fuel pump was 6 volt, which didn't make any sense to me.

Is the fuel pump wired for 6 volt or 12 volt ??

I need to know the lift and duration on the stock 7MGTE turbo cam ??

Did you have to increase your injector size and how is your idle ??

I have a HG job, I have another head to replace the old one. My problem is, how do I put the Cam Sensor back in place at TDC ??

I am wanting a Street/Strip cam and trying to figure what lift and duration I would need. I read that you shouldn't go over 280 degrees on the duration. What lift and duration should I use for a daily driven Supra wanting more power??

I have a exhaust leak now on my '88 Turbo, it is more like a ticking sound.

All turbos whine :icon_bigg