Search results

I have a Pivot super baby turbo timer,with no instructions and was wondering if anyone here has one installed,or can tell me what wires go where? 5 wires i have are 1. red(hot) 2.black(ground) 3.yellow(signal,or constant power?!?!?) 4.blue( ? ) 5.brown( ? ) couldnt find anything...

will an auto harness work on a manual trans? if so what needs to be done?

im swapping an auto car to manual.the car im putting this into is a 89' turbo,and the car im pulling it from is a 87' turbo. and im swapping the entire engine and tranny from one to the other. will the plugs behind the dash plug into the pre 89' wiring harness? if not what is the easier way to...

This is gonna be a long one! As the title says ,the supra died on me last nite. well i cant say it actually died but its gonna need a rebuild.heres how my wonderful day started yeasterday! 1st i volunteered to work,went there fixed a buncha cars. had extra time so i went through my guage wiring...

Ive been tryin to figure out why my car has been running so rich. ive checked all vacum lines,intercooler pipes,and loked pver the wiring to the AFM. replced the o2 sensor... only code i have stored is a knock sensor code. ive replaced the front knock sensor. i think i just need to ground the ks...

I was searched to find a awenser for my ? but found nothing soo. are there any cars that come from the factory with 550cc top feed injectors? i know rx7's do,but they are side feed!.the reason is i work for a dealership and can get stuff and dont have to pay for it all up front! : )

Went to the track last night.this is what i ran: ( 4 runs) 1 2 3 4 r/t- .597 1.025 1.147 .930 60'- 2.198 2.422 2.373 2.392 330- 6.185 6.500 6.646 6.648 1/8- 9.477...

Sup ppl. i just picked up my cooleze IC pipe set,and intake pipe today,and now i need to know what to do with the hoses coming off of the intake. i will be installing a greddy type rs BOV,so i will no be needing the stock bov,but what do i do with the hoses connecting to the stock bov? and where...

still new to the drag scene...but here they are! 1st pass: 2nd 3rd RT-1.054 RT-1.045 RT-.905 60'-2.571 60'-2.374 60'-2.303 330-6.695 330-6.407 330-6.276 1/8-10.046...

I used the search function but found nothing i was lloking for so.... Im looking for a FULL hradpipe kit w/bov flange,and was wondering who besides cooleeze makes this kinda kit? i saw n another post that lipp,and driftmotion carries a kit,but neither come with a BOV flange.any help is appreciated!

i need to know which spark plug wire goes to which coul and cylinder...trying to make sure i didnt put the wrong wire on the wrong sparkplug,or coil

no need for a speil,heres the # 1-174 2-173 3-160 4-160 5-165 6-170 7-0 8-never found it! dunno what specs are,but from what i think i know...the numbers should be no more than 10psi apart....

anyone know which wire i tap in to on the back of the ECU to get my signal?? i had it hooked up at the O2 sensor,but i was told i need to connect it as close as possible to the ECU...sooo which wire is it,and where can i find a diagram for the ECU pinout? (dont have wideband)

ok i have a air fuel guage that i just installed,and it has 3 wires 1 red 1 black 1 green or sumthin,,,i may be wrong ,but im pretty sure that the black is grond,the red is the hot wire,and the other is supposed to bec onnected to the O2 sensor wire that sends the signal to the ECU...rite...

a freind of mine has a safc2 but the one for the vtec controller on it also,i was wondering if it would work on my car the way a regular safc2 would?? he said it should work just like a regular one...was wondering if there is a difference between the two besides it also being able to control...

i bought one of those ebay "type RS" BOV's and i can put my mouth against the bottom of it and blow,and you can hear air coming out of it!!!....ive read these BOV's arent to bad,but im pretty sure air is not supposed to come out just by putting a little air pressure on it is it? even when i...

yeasterday i drove my car to work even though it has a REAL bad IC leak,when i went to leave work it wouldnot start,i checked all fuses and whatnot....after awhile it finally started,i drove it home went as easy as possible on it.when i cut it off after i got home is started rite up....now this...

ok, i just got back from NOPI @ budds creek,and last nite i made 2 runs 1st run: Red lighted -.074 60 foot- 2.943 330- 8.003 1/8 - 12.136 @60.41 mph 1000 foot - 15.589 1/4 -...

im goin to the track tomorow,and was wonderin how high could i set the boost on my car and still be safe??? all i have is BIC DDP,and strait pipe exhaust after that!! and a HKS filter couldnt find much by searching................:1zhelp:

sup ppl ,,, im goin racing this weekend,kinda trying to get a round about time yall think my car SHOULD run only mods are: BIC ddp,BIC test pipe,and 2 3/4" pipe from there!! and im gonna crank the boost up to about 10psi i know alot depends on te driver,but...