Search results

http://www.supramania.com/forums/showthread.php?t=62343

My MSD 8.5mm work just fine. When I got my set, there was one that has the plug connector end glued to high on the wire and didn't allow it to seal to the 3rd galley cover. I contacted MSD and got just the replacement one, #4 or #5 don't remember. Been working just fine ever since. edit...

COOL! Welcome back :bigthumb:

My custom. It cost dollars :D http://i80.photobucket.com/albums/j187/isnms/Supra/MyCupholder.jpg and the one I fabed up for my Jimmy http://i80.photobucket.com/albums/j187/isnms/Supra/jimmy_cupholder.jpg

rare or not, they aren't very useful. I took mine out.

Nice work!

Looks like those wires could be for the EGR VSV. Shown here to be black-red/red-black http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=47

Did you blow an IC hose boosting? Check your codes: http://www.cygnusx1.net/Supra/TechTips/engine_error_codes.aspx

The SOGI write-up - check The HKS TEMS controller - check Those are the two common options. Add my info: The mod is effectively performing the steering sensor system check http://www.cygnusx1.net/supra/library/TSRM/fa/FA_39.html Test this way: jumper Ts & E1 TEMS switch...

I did my exhaust side "Helicoil, in car"

Hey shaeff - That's the image I gave him on SF. I cite NJsupraA70 as source :dunno: http://www.supraforums.com/forum/showthread.php?p=7189390#post7189390 at least as early as April '07 http://www.supraforums.com/forum/showthread.php?p=5135864#post5135864 NJ claims it March '06...

Quote from NEO program update request form. Apexi will send you this in an email to fill out and return with unit. Black: PM'd you email contact I used to update mine.

http://www.supras.com/06/main/index.php

I was not. It's pretty high up. Had to pull the trans, flywheel. I was prepared to do rear main seal but turned out to be the plug.

I haven't done it :: facepalm :: It is just a drip now and I'm pretty sure it is either no FIPG at timing case to block or the front oil rail plug. I don't want to do one to find out it was the other. So for the moment I just live with it.

Then you also found that if you send it back to Apexi they will upgrade the firmware for free. You only pay shipping to, they will upgrade and ship back, and at the time I did mine, send you a t-shirt, for free.

http://www.supramania.com/forums/showthread.php?p=482987#post482987

:rofl:

If you don't have an answer; Why post? hsvmk3 - Like mecevans said, it's probably the ring on the back of the door key cylinder. Try unlocking from the other side. Does it still do it?

Using different fuels ..... kind of explains it in the info I posted.