Search results

  1. gilberjj

    XTD Prolite Racing Flywheel

    i don't like findanza cause they are aluminum
  2. gilberjj

    garrett gt4082 users

    here is a 16psi pull with my pt61. as you can see, cams will help it breathe on the top end as it starts choking out a little before 6k. i would get the pt63 if i were you. if i was above 4k, and i hit the gas, it was instant boost. not too much below 3.5k, but its as easy as a downshift...
  3. gilberjj

    Darin goes 8.79 @ 162!

    holy crap, but a 225 shot will get just about ANY car moving....
  4. gilberjj

    Best Way To Build An 11 Second 7MGTE

    if you consider shot peened insides stock......
  5. gilberjj

    Questioning my turbo choice...

    be a guinnea pig.... DOOO EET
  6. gilberjj

    garrett gt4082 users

    If i were to do it all over again, I'd get a s366 from here http://www.bullseyepower.com/S300.asp I ended up first getting a precision 61mm which spooled FAST and pulled hard. I don't really care about spool that much and ive ditched that turbo and my master power t70 arrives on monday. This...
  7. gilberjj

    XS Power Aeromotive FPR copy

    i hope you don't plan on ever running e85 through those rubber hoses. it will have a pac man effect :yum:
  8. gilberjj

    Supercharger on a 7M

    and it shall be called "crazy sexy!"
  9. gilberjj

    gilberjj's build-up thread!

    here is a rundown of what work will be happening to my car this weekend, and the next week. but FIRST, if you don't already shop at driftmotion, this is why you should, aaron bought me a new disk $125ish, and an act extreme pp $359ish because the action sg3 didn't work out for me. If that...
  10. gilberjj

    XTD Prolite Racing Flywheel

    oh ya....... im having mine resurfaced cause i had a clutch slip on it....
  11. gilberjj

    Tacoma area supras?

    it was good to see you before you took off. i hope to see you in 15 months, and thanks for what you're doing, ill be praying for you
  12. gilberjj

    TX2K8 thread - $$$$ to the 7m in the 10's - Let the smack talk begin!

    8k rpm and is that 30psi......? why does it say -5.6??? beautiful though, i wish i had that capability
  13. gilberjj

    XTD Prolite Racing Flywheel

    thats almost the same set-up i have..... i have an extreme pp action 6 puck disk xtd flywheel
  14. gilberjj

    TX2K8 thread - $$$$ to the 7m in the 10's - Let the smack talk begin!

    what constitutes as "small kids and dogs?"
  15. gilberjj

    GTEpowered.com is getting well known! Vid inside (from Spain) Update Dec14/07

    All my parts should be here by monday, then ill be heading to the dyno as soon as i can scrape up $75! by the way....... are dyno packs any good? thats the one where you take off your wheels and bolt them to the dyno packs. there is a shop that does 3 pulls for $75, and thats the cheapest ive...
  16. gilberjj

    Any clue on this exhaust brand?

    looks stainless......... a nice wrx with an exhaust went by just now outside...... sounded good
  17. gilberjj

    XTD Prolite Racing Flywheel

    ill tell you in two weeks, im at the 500+ hp level
  18. gilberjj

    Power/Fuel Economy Issue

    however, with my 720's feeding the 61mm i had, the gas goes real fast if you do ANY "spirited" driving. The great thing about the map ecu is, i can set it to 15:1 a/f going down the freeway. That is great gas mileage!
  19. gilberjj

    Brian Cower Cams :: Talk to me about it.

    trd=200 hp! they are jdm TYTE ;)