Search results

/\ I wish i had that much room in my engine bay! Plumbing a single turbo is still a pita, I tried. Although the SBC isnt nearly as wide, so it may be much easier. There is a website floating around where a guy built a 350 Supra with two turbos mounted down on the sides of the block, that puts a...

Wow, that intake manifold is beast! This sounds like it will be killer, pleas dont back out half way!

My suggestion, neither. Find your self a cheap Celica or Civic for a DD. Keep it BONE stock, and dont think about thinkering with it. Save what money you can through school, and keep your eye out so when your done with school and get your self a good job you have a nice chunk of change to buy a...

My vote goes 1UZ or a FI 350. For the money you would spend building the NA 7M you can do a 1UZ swap and have money left over. I just helped a friend in Virginia finish his 1UZ swap, he did everything for under 2k, that includes the car purchase... Wiring is simple with the 1UZ, my wiring guide...

I found a spare ECU I had, it has the same part number. When I looked up the number it appears its for a 95 SC400. Upon installing it and going for a test drive I noticed it ran EXACTLY the same... I thought my engine harness was from a 96, so maybe thats the issue. Now I just have to source a...

So I have checked over everything twice. I cant find any fault in my sensors. They all appear to be in good working order, I tested the wiring between the ECU and the TPS, no issues. I still need to test the wiring between the AFM and the ECU, but I don't think I will find any issues there...

Hi all, I need some imput on a wideband set up for my Supra. I have a AEM V1 ECU, Initially I planned on running two UEGO wideband sensors with the AEM Inline Controllers. Then use an AEM serial gauge connected directly to the ECU and flip between both banks to read A/F ratios, but as I'm...

Yea, the caps and rotors are ok, I replaced them when I did the other ignition components. I drove the car again today, did a good pull in second gear shifted to third and bam, no power when I got into third, the engine would not rev at all. I had to let off the throttle and then get bact into...

The manufacture got back to me. Its a GM oil pressure sending unit, but I havent been able to find what vehicle yet. I think it will take going to the auto store with the one I got and finding one that is the same.

Hi all, I'm having some issues with my 1UZ. Recently its becoming more freaquent, happening between normal shifts, and free revs. Most of the time when I'm cruising and do a WOT jab the engine lags, then starts reving. You can clearly hear the intake "chunk" air then it starts to rev...

How much of the dash will it cover?

So I found this PDF: http://www.sensata.com/download/auto-ap2-ac.pdf Looks like it may be an automotive air conditioning pressure sensor...

Ok, on the website they say "Texas Instrument USA Oil Pressure Sensor" I have looked around and havent found anything that matches. It appears that there was a part number and perhaps a manufacture above the "Made in Mexico" that was scratched mostly out by a dremel. This is what I can get from...

I freaking LOVE that amp wiring! I'm a wiring nut and that is awesome!

Has anyone seen this sending unit before? There are no part numbers and customer service at Daemon does not exist.

As always, great looking car!

On the SC harness the plugs are the same 92-97, after that it gets a little fuzzy. I havent dealt with anything newer than the 97 EWD book and an actual 96 harness. You will need dash plugs (5 total; 4 needed) IJ1, IJ2, IK1, IK2, and II1 if you want to control your heater valve. In the SC...

I have had the Mustang 5.0 rack in my car for about 30k miles. I love it and hate it. If done correctly its a great mod, but incorrectly and you risk hurting yourself and others... I don't think I would go back to a standard engine mounted power steering pump though, I like the simplicity of the...

I have a pre-89 one, I made it my self but no one bought it yet: http://www.supramania.com/forums/showthread.php?140912-Pre-89-7M-GE-ECU-quot-Patch-Harness-quot-115-Shipped-OBO-Harford-County-MD I have since added the wires to have it work on a turbo. Send me a PM if that interests you.

That would be a great parts car if you got it for about $300-$400. Plenty of useful bits there.