Search results

I was going to order that heavy duty shifter seat from Marlin Crawler and after I entered all my info, I see that they were going to charge $20 for shipping!! Its just a little plastic ring. Anyone really pay $30 for this thing?

Well I've had my turbo off the car for a while cleaning it up inside and out. I used carb cleaner, but thoroughly washed it out afterwards. So tonight I poured some oil into it just to prime it up. After sitting there for about 5 minutes I check it, and there is oil leaking from in between the...

First off, I did read the couple threads on this same topic, but I have some different questions that werent covered. I dont have enough money for a full spring/strut combo so I'm just getting the stock JZA70 springs for now. 1. Has anyone had experience using these on the stock pre89...

I've had these for many years and I dont even remember where they came from. Are they special, rare, expensive??? I just looked up Spinneybeck and they are a leather company, but thats all I know about them.

well this is what i get for forcibly removing my exhaust housing from the center (even though the chip is on the compressor side). i really hope to not have to buy a new one. could i be alright still using this? is this a matter of air leaking out or what?

am i the only one who doesnt know how to post pics up in a thread. i dont have image shack or anything like that. how do i just get pictures that i've got saved on my computer up onto a post? oh and i feel like an idiot.

I just want to clean my turbo as much as I possibly can without having to have it rebalanced. So how much can I take off? Compressor housing, anything else. I know this isnt going to do anything, but get it cleaner, but I've got it off and wont be needing to put it back on for a while. Also...

I've got turbo 5 spd and when changing motor mounts I realized that the passenger side transmission wing mount was snapped right in half. Do I need to replace this right away or should I be okay? If I need to replace it, is it okay to just take out the bolts that hold the trans casing to...

Im just about done with putting my universal IC kit in and I've got everything solved, but that damn pipe that goes up to the turbo. I've got the correct reducer 2.5 in piping. The pipe is hitting the oil filter housing which doesnt allow the pipe to fit all the way (and straight) in the...

i had a completely busted passenger side motor mount so i got a new one to replace it. im changing it and the bolt will slide through the mount on the block, but it will not sit flush (w/ the pin in the hole) with the block mount. i have an 88 chassis jdm engine, but no idea what year it...

I have the summit single filter kit and have the car all apart right now and I just need to know if I actually do need the n/a adapter? I read through the whole sticky about it, but it doesnt really say if its absolutely necessary with the summit kit. The kit does come with all those adapters...

i just have a stock afm w/ the 3" hks afm adapter. does anyone know the k&n part number for the real short stubby air filter that will fit my situation. i ordered one from summit and got it today, but its definitely the wrong one as the opening is like 9".

Where could I get this done after I'm done cutting my universal pipes? Machine shop, exhaust shop? I take it they use some kind of press?

I've searched, but didnt find to much. Car: 88 turbo Situation: broken drivers side motor mount Problem: dont have an engine hoist Solution?: have a big ass craftsment jack +2X4's Nobody ever said if it was completely possible to do it without a hoist. Has anyone done this first hand...

Alright, I need to hook up 12 LEDs. There are two ways I'm trying to decide how to do this......... Here is the first. What kind of battery(s) should I use? I need the small amount or smallest space possible to be used. Also, what resistor, if any, would be needed in this setup? The...

I only found a couple threads with IC pictures. So if you have some pictures of your intercooler with the front bumper off I would appreciate it. oh and especially if its an hks small front mount. i have looked at ma70.com, but there arent any pics of the IC mounted. thanks

Just wondering if I buy an n/a gauge cluster w/ the volt gauge, will this drop right into my 88 turbo? and.....if anyones got one f/s let me know!

I'm going to remount my IC so I figured it would be easier with the front bumper cover removed. Well I just messed around for about an hour and all I have is a gigantic pile of nuts and bolts and a bumper that barely budges. I cant get that top nose piece off? Is it in some way connected to...

HKS IC brackets. I just have the IC and I dont know where I can get some. HKS wants me to pay for the whole kit if I want the brackets so I dont thats the smartest route. Even some up close pics would help. Then I could make my own. Any input appreciated right now. I'm going to be mounting...

If they are in fact called this.....where can I get one? I'd put up a pic, but I cant find it anymore. I think its also been called a rear windshield wing??