Search results

Hi guys. I've tried searching about this subject but couldn't find anything. I took off the little cap for the fuel return regulator and the little screw was screwed all the way in. This means the reagulator is wide open correct? What is the proper setting on this? I'm upgrading to a mk4 fuel...

I'm gonna be hitting around 400hp soon. I've already got all the parts needed for that to be relatively reliable. I've also got a brand new stock clutch and PP along with bearings from toyota. Will this clutch crap out on me? or will i have to go with a different disk? I understand some SPEC...

Hey guys i got about 5 quarts of redline shockproof gear oil for free. I'm wondering if any of you guys have had experience with it. Is it compatable for my r154 or LSD gear box? -Steve

Hi guys, I'm in the middle of replacing some gaskets on my 7m. I have the engine mounted on a stand right now but i forgot to loosen the bolt for the harmonic banancer. I know i'll be needing a puller but how do i loosen the bolt? thanks! -Steve

Hi, those of you who have ordered from summit listen up. I'm soon to be placing an order with an oil pan gasket. I'm not too sure if its the correct one. Please confirm this item for me. THANKS! http://store.summitracing.com/partdetail.asp?part=FEL%2DOS34405&autoview=sku

Hi, I recently bought injectors off someone on the forums and he suggested that i have them flowtested before i install them. Does anyone know of any good reputable places to send my injectors to? thanks -Steve

So i took off the accordian hose the other day and it was covered in oil. I suspect the PCV system to be the cause of this therefore i'm smoking upon deceleration. I plan on getting a catch can using an N/A PCV pipe and running a line to the accordian hose. What am i supposed to do with the pipe...

Hi. I've tried searching but couldnt find anything. I'm intrested of where and why people thought putting n/a cams in a gte would be beneficial. Is it beneficial? My turbo head is going in the pooper and i have a MINT n/a head laying around. -Steve

Hi i just bought a car in MT and i need it to be shipped over to the east coast (NYC). I've searched for several shipping companies. The cheapest was $1200. The car doesnt run btw. have you guys dealt with any shipping companies that are dependable and cheap? let me know. thanks! -Steve

hey guys check this out. Their main focus are imports 25 years or older... in a few years our supras will qualify. They have a lot of sweet pics and articles. www.JapaneseNostalgicCar.com -Steve

Hi guys im currently running 285's on tt wheels in the rear. when i make left turns the tire seems to rub. it doesnt do it when i make right turns. I'm running kyb's with stock springs. what could it be? also, when the car is cold and when i drive it @ 10+mph it feels like the rear wheels are...

Hi i have a 7" wide rim with 255's on it. What is the widest tire i can fit on this rim? thanks -Steve

SO i hooked up a timing light to the 1st plug at worked today and shined it at the crank. the notch was pointing at the 5 deg mark on the block. Does this mean 5 degrees advanced or 5 deg retarded? What should it be at and how do i change it? This is a stock supra btw with minor mods. thank you...

Jerry's car got stolen. the cops bought elaine and jerry to the pound to look at a stripped saab 9000 turbo there is a silver sports car with a rear 1/4 window like the supra's and the door handle much like the supra's. -STeve

So i bought EBC greens off of this guy Louis for a good price and i was installing them the other day. I got the passenger set of pads in by pushing in the piston w/o opening the bleeder valve but the driver's side was giving me problems. The caliper slide on the driver's side caliper was...

i have an 88 supra. Im wondering if the post 89 supras have better side view mirrors to give you a better/clearer view of whats next to you. THanks steve

Hi guys. I turned up my boost to mabye 9-10 lbs and i think my plugs are blowing out. I had them gapped at .028". What am i doing wrong here? Also, my head is making this ticking noise. Its not the injectors. When i put in my head one of the threads of the bolts on the cam journals had stipped...

HEy guys. I'm running NGK BPR6eix-11 iridiums and they seem to have built up some white deposits. I gapped my plugs to .28 I understand the cause of this could be caused my a lean mixture, overheating, or advanced timing or something. Please tell me what i need to do. oh yea, my car is 100%...

Hi, I had a bad o2 sensor wire connector and i recently fixed it by extending the harness wires and crimping them together. The car doesnt backfire anymore and it seems a tad faster. am i just experiencing a placebo effect or psychological impression that the car is a bit faster? Does fixing an...

It was a rainy day, a bad day for supras. I just got off work at 7 o'clock and i was driving home. I was on the left lane of a 2 lane road and the 07 camry in front of me decided to slow down at an intersection to make a left. He was stopped on the left lane waiting for incoming traffic to pass...