Search results

I have no way to measure these and I have searched but no luck but does anyone know what the thread size is for the HKS series wastegates, preferably the 50mm race one? I am trying to find a fitting for the hose for the boost controller and vacuum thanks in advanced :)

Okay so I have 2 choices in DP to use for my Vband set up http://cgi.ebay.com/ebaymotors/93-98-SUPRA-2JZGE-TURBO-DOWNPIPE-DUMP-INTAKE-IS300-/260535133711?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item3ca91aa60f or...

Okay so I am making progress with my build and have noticed I am missing a few nuts and bolts throughout the engine :( Bought a parts lot basically when I got this gte and I was hoping it was all there. question, on the block under the timing cover, is there some sort of fitting that goes to...

Okay so I have 2 oil pumps here, 1 that came with the bundle of motor parts I had purchased and the other I received before this which was a "low mile" one. Question I have is when I rotate the gear at the bottom one pump is free and easy to move the other is a bit tougher but both make the...

so where do yall get your couplers? I bought some kit months ago from a kid for cheap, pipes are pretty good but the couplers, ehh I've seen better haha I want a good multi-ply style set especiallyfor the 90 bends and such so they will not blow off. I'm sure someone has a good ebay seller they...

ALright so I'm a noob and have had my wastegate sitting in it's box for awhile, apart.... I can't remember how to put it back together :nono: Can someone help me with? I even got a picture of all the parts, the instructions are in Jap and the pictures are useless

Alright guys, simple question I promise. what size bolts are needed for the tranny holes so I can get this motor on my engine stand? I cant use my existing bolts because they are on my ge motor right now which is in my car still :( I went to Lowes and got some M10 x 1.25 and they don't thread in...

Okay so I am thinking of a new wheel and tire combo for my car. I think i want to 16x8's all around with some 255/40's on all four corners or maybe a wider size rim like 16x9 or 10? I'm looking for some pictures of a similar style and if you can post some pics and specs that would be awesome! I...

Does anybody know what the part number is for the arp flywhee bolts? I tried searching but no luck on model number ( i probably didnt use the right keywords haha) I have a 7mgte that I will be using the W58 tranny and clutch set on for now but I want to order arp's because I think mine will...

I was searching and think I got it nailed down but I am still a bit stuck. I am leaning toward composite because of cost and ease but I want to run more boost then stock level so I know I need a MHG. Back when I built domestics we could run Fel-Pro's and tons of Spray and be fine with ARP's but...

So who's the owner here haha Gave a honk and a hand gesture when they passed by nice looking one too

Hey guys, I just accepted a job for management here in the Raleigh area and will be there this weekend permanently. Looking too see what there is to do or any supra meets around 352-817-4650 text is best or call

Okay so me and my buddy wired up my SAFC on my GE and it worked. SO we put the glove box together and we started the car and no go! We tooko it apart to check the wiring. Now the wiring is right, we rechecked it again and the problem is the voltage to the afm wires is low. When we open the key...

Okay so when I first bought my car I had to redue my brakes. I had changed my master cylinder, front brake calipers and braided hoses all around. Now the problem is during the heat of the day my brakes get very hard and start to lock up on me. Now in the evening times I don't have this problem...

Now I am just doing this on my GE for now until I'm ready to build my turbo motor. I have an APexi SAFC and all I see is the gte wiring. Has anybody successfully wired these into a GE and do ya have a write up? I'm a bit concerned because I know the harnesses and ECU are different.

Can anybody identify this? Got it from a friend and the plastic piece looks worn, can it be replaced? Does our stock one have that on it or is that just an aftermarket feature? Sorry for a crappy cell pic but it's the best I got right now until tonight but maybe somebody can figure it out?

haha very random but I thought it was cool being a boring sunday to say hey I made the big 100 post club haha even with that I have yet to be called a noob :)

Will one of those ebay billet caps work on our covers? I've seen people with them so I'm not sure if ebay is the place to go?

Okay so I got these with the supra parts I got from a friend. I think these clutches might be from a r154? OEM Stage 2 flywheel I figure I can have the pressure plates resurfaced and be good to go. Though if I'm going to run my w58 tranny for while, will the disk fit on the shaft?

I'm looking for a decent kit that isn't to pricey for my build up. I have a stock rail with the stock FPR but I'm sure that will not work for my needs very long. Found this kit, anybody use them...