Search results

I just typed "s13 radiator " and it came out. I check out the specs on the mk3 radiator like the Haste, and koyo here are the links to what i looked at...

You might want to check your o-ring that goes on the bottom of the injectors , they migh not be sitting right or the fuel rail is loose. It has 3 bolts that tighen the fuel rail to the head. As far as the Bov check the diaphram, my greddy rs one had a small pin hole in it. Good luck

Guys I have the same problem too, it sputters at high 5000-6400 rpm. Were do most of you guys get the Ngk 3330s none of the autozones have them here in Houston,tx. I didnt mean to hijack your thread man its just that i have the same problem.:1zhelp:

I was looking at radiators in Ebay and saw the info on both of them. They both have the same dimensions, the bottom mounts will most likely need to be modified for fitment but not a big deal.

Guys I was looking at the radiators and found out the the s13 radiator has the same dimensions and it has inlet and outlet as our radiators but hell of alot cheaper for a 52mm thick s13 radiator. Now my question is HAS ANYBODY DONE IT? s13 aluminum radiator = $120 shipped mk3 aluminum...

Does anybody use one of these LC-1 widebands? Im trying to tune my car but i was wondering if you can datalogg into my laptop with this wideband and im tunning with the SAFC 2. I would go with the aem uego but no dattaloggin technology. Any help would be appreciated thanks

Congrats Gixxer we had alot of fun at the National. We would of loved to have seen that 7M beast rev that 76mm to 7000 rpm. Two first place trophys man thats awsome. A big thanks for letting me borrow your helmet, it was was first Supra Nationals and I took 2nd place on the drags. Ill see u at...

thanks j dub that is the answer i wanted to hear and to you guys too. Im about to head out to College Station by were the Road Racing event was held at, just to check out some of the rides out there. Tomorrow I get out at 12 noon and im heading to the dyno hopefully i can get some of that dyno...

I just got my fully rebuilt and flow testes 87 rx7 turbo II injectors back and i want to run 18 psi with the followin mods were should the base fuel pressure in my AFPR be to run 18 psi?? mods: ct26/60-1 k&n fipk bic ddp + 3in exhaust no cats spec stage 3 12 lbs flywheel walbro...

Lol i know Grim i belive that the blue paint holds 600 ft/lbs of torque and the red like 400:biglaugh: Yeah its starting to sound like an ebay xtd clutch. Are u buying a new clutch kit???

I dont know if rps uses a stock modified pressure plate like everybody does. i have a Spec stage 3 and it uses a stock modified pp and a disk like the one on the picture. Quick question what color is your pressure plate? I know that my Spec pp is blue we might be able to identify it by its color...

I found out guys that my speedo is reading +10 mph, let say it reads 60mph when im actually going 50mph. I personally haven't changed the gears why im i reading +10mph? I found out when i was passing through several speed readers on the freeway. By the way the light blue line on the middle...

Were is his shop at doward?? i found 8 injectors and the owner is in california. I would like to send the injectors directly to the shop but before I need to talk to the guy first. oohh and thanks for the quick reply

Do any of u guys know were to get a set of fuel injectors rebuilt and flow tested?? Any personal experiences? How much per injectors?? any info will help found a set of rx7 turbo 2 550cc low imp injectors and im gonna rebuilt and flow test them.

By the way AFPR means ADJUSTABLE FUEL PRESSURE REGULATOR LOL:icon_bigg

Not out of production yet and it wont be i hope so. Guys if you are stackin up remember to get the Rewards card for your points....By the way use yahoo map and look for the autozone and it ill tell you all the Az with in your city or cities around....just more info for guys. I just changed my...

REDEJ8 you can order the GC from any AZ with the information i posted on page on last post. They will automatically let u know which store has GC closest to you. I just talked to the manager in the AZ and he told me that any AZ manager can order some for the store all u have to do is just...

Here is the number for the German Castrol for Autozone #340533 06068 Castrol Syntec Sae 0w-30 Syn motor oil 1 qt Hope this helps you guys that can't find GC at your local AZ order some before the Sale Ends...

I got me my third oil change and i found 1 bottle of MO3 and 1 bottle of M04 then we searched the entire back for the rest but no luck .....:cry: By the way German Castrol is not too thin read the Write up on the Oil section ..... SUPRAGEEZER ill get you the part number in a minute or two...

By the way i dont work for Autozone just to make things clear, im posting for the benifit of our supra community....