Search results

What's going on guys? I just replaced my faulty Walbro and I think I'm ready to dyno. I'm confident my motor is broken in and I'm interested in seeing what my car can do. As far as tuning goes, I will admit, I am a novice. Shaeff and I have been doing some minor tuning, however, we have been...

What's going on guys? I just finished tinting and clear coating my tail lights. Pics coming soon. However, my gaskets completely fell apart when I removed the lights. I was looking through the EPC, but I couldn't seem to find them. Do I have to get them from Toyota, or could I go to Advanced...

What's up guys? I purchased a set JDM Power Folding Mirrors. I've been searching for a few days and found Goliaths Cardomain page. I also found this: http://www.jzgte.com/tech/1jzgte/1JZMirrors.pdf The link doesn't seem to be working though. Does anyone have anymore information regarding...

What's going on guys? I've got a "Walbro" I purchased off ebay. However, I'm starting to think it might be a cheap knock-off that went bad. Over the past two weeks it has gotten extremely loud. I can hear it a good 50-75 feet away. I also noticed I can't rev past 4k rpm without running extremely...

What up guys? I know a turbo timer install is cake, but I'm a little stuck. I dont have the harness, so I need to splice in. I got the directions online from Greddy and they only show a 4 and 5 wire ignition, but there are 7 wires coming off our ignition (Blue/Red, Brown/Red, Black/Yellow, Solid...

Well, its now 1:15am and I'm just getting home from an eventful night. I've got about 60 miles or so on my new set-up and I'm still working out the kinks. Today my Prosport Oil Pressure Gauge saved my motor from killing itself. After cruising at about 55mph, my Prosport oil pressure gauge began...

What's going guys? I've finally gotten my car all together. She's running well. I'm only boosting 6 psi on the Frank 5 20g until I got a better tune and break in my motor a bit more. She pulls like a bat out of hell though. Unfortunately, my Walbro fuel pump just started getting really loud...

What's going on guys? Shaeff (Chris) and I finally finished installing my new 5 Prosport gauges. Everything looks phenominal. Well worth the money so far. I'll get some pics up soon. I just wanted to know how to program these damn things. I tried to figure it out by the directions, but no luck...

What's going on guys. I currently have an Oil Filter relocation kit. I will be going with an NA Oil Filter Stud as well. However, I'm running a Large B&M Oil Cooler. I've been doing a lot of reading and was wondering if I'd need to run a remote mount oil thermostat. Any ideas or thoughts are...

What's going on guys? I just wanted to make sure I hooked up my EBC correctly. In the diagram, it shows a 3-way vaccum line connecting from the Intake Manifold, then to the fuel pressure regulator and back to the controller. Is this correct? If anyone had a picture of some sort, I'd appreciate...

Well, yesterday a lot was accomplished. I was lucky enough to have Slow66 and Shaeff stop by my place and help me fab up some Intercooler Pipes and wire up my Maft-Pro. The Day started off with Bryan and Chris showing up at my place at 8 am :cry: . After everything was said and done, all my...

What's up guys? I purchased a set of 680cc PTE Injectors. With all the horror stories I've read about recently about injectors going bad, I'd like to have them blueprinted and make sure they're ok. RC offers this service for around $24/ injector. Does any other place offer the same service for a...

What's going on guys? It's been a while since I've posted, but I'm always around (especially checking to see when those cams are gonna be done :3d_frown: ). This is my current set-up: Re-built motor with 3k miles -Re-balanced crank -Crower Rods -.40 JE Pistons/ Rings -Titanium Valve...

I can't stand this class. I used to think it was very interesting but my professor is monotone and I can't stay awake. Who wants to write my paper that's due tomorrow :naughty: ? Here's the topic: "How are each of the three charges against Socrates denied by his actions in both the Meno and...

What's going on guys! Here are a few pics of my new elbow from Jon @ MDC. It's a custom V-Band 3" elbow with a 2.5"-3" adapter. It's also got an EGT and o2 sensor bung welded on. Tell me what you think. Thanks a lot guys. Mo

What's going on guys? Of course, I've done plenty of searching but I like to get updated feedback from you guys (Cuz I value your opinions so much :naughty: ). I've decided to purchase a set of 264/264 cams. My question is, is it really worth it and will I notice a difference? This is my current...

What's going on guys? I was wondering what are the advantages of running an Externally Wastegated turbo rather than an Interanlly Wastegated? I'm running a Frank 5 Greddy TD06-20g and was just wondering if I'd gain anything running a 40mm HKS Wastegate with Dump Tube? Any thoughts or responses...

What's going on guys? I just received my T4 -> T3 adapter from Jon@ MDC and it's gorgeous. The welds are some of the best I've seen. This guy can make just about anything. So thanks again Jon. I can't wait to get my new elbow. :evil2: Mo

What's going on guys? I just wanted to give Jon @ MDC a public thank you for all the help he's given me with my car recently. He just finished making me a custom T3 -> T4 adapter for my ebay manifold and he's also in the process of making me a custom V-Band 3" turbo elbow with EGT and o2 sensor...

Alright I'm in a little bit of a jam. I bought a cheap ebay manifold and a T3 -> T4 adaptor. Because of the way the turbo is going to sit, I can no longer use my Trust Turbo Elbow. I've been looking for a flange to possibly make my own downpipe, however, all I keep finding are 5-Bolt Discharge...