Search results

straight out of the hood with a glass pack and flapper from some farm tractor = PIMP

hummm maybe I will just post in both http://www.youtube.com/watch?v=c1y7X_WREvA http://www.youtube.com/watch?v=k3fKuEmIapk&list=UU1BJT5s3c5I10EW0QBHNFkg&index=5&feature=plcp

hummm maybe I will just post in both http://www.youtube.com/watch?v=c1y7X_WREvA http://www.youtube.com/watch?v=k3fKuEmIapk&list=UU1BJT5s3c5I10EW0QBHNFkg&index=5&feature=plcp

i may beign maken an exhuast soon with side pipe waste gate dump by the front tire

the hush power is great muffler it's the opnyl flow master I will use

I have thought about it, but it would be pretty hard on lowered car and it whould have to be twin since the pipe will have to be like 3 to dule 2.25 tip and then keeping it form looking hill billy

they got the word harder from me, I'm just that good.... and they most likely got the word hurry from you Don hehehe

^ Man you should start wearing there t shirts and hats and shit become there mobile bill board you be good at that nick named pro efi man kinda like duff man form the simpsons

hummmmmmm

ahhhh hear ya.... but I here pro's and con's form the stone age 12 valve and the newer cumins to the dura crap to the power masturbation stroke I still find it funny that dodge has a ford motor in there truck hahahaha ps about your toe if one side is out it's rather easy to do in your...

Hey hey sometime's I drive like the back of my car is on fire....... but not all the time I think it's goes like this. The shitter or more gut less the car is the faster I drive it lol

^ hummmmm you should put down that jiffy marker your smelling that's like 643 km highway and like 418 km street best I have gotten is like 550 km with mix of short highway (live on island) and normal roads being some what nice, this was a lexus afm sfac2 550 setup witch was rather lean...

Well yae but these will go away rather fast and has nothing to do with a car sitting I can only explain this one way since and can't not go to tecncale in because of to many factors and my lack of finer Knowledge in it ect see when your grinding a block of steel or some thign along thous...

I would have to argue about this a bit... is it bad to let you car sit and warm up..... nope no harm but wasting fuel... but nice toasty car thou on a cold day. will it wash your wall's..... no again....will it coatmate your oil I would have to say no again since the rpm rise's form air...

greddy's are coated installed them before do not use copper spray and if it is not coated send it back ps greddy makes the best fitting head gaskets to bad they never made a stopper like hks and there harder to get oh well

it could bee it's bena like that but it's 2 years since I replaced one could be plastic could not bed just replaced so many bushing like this on other cars some are down right scary ever see ford trucks lower loaded ball joint sketchy

not here they just steel inner race incased in a plastic ball in race much like cheep ball joint nagard less these ware out and can cause alot of play

oops sorry it's not the toe arm it's the lower camber link/arm this one has to swivel or the bushing would bind on any sort of alignment and destroy it's self. I have replaced them before if you pull back the rubber boot you will see it has plastic knuckle and they can get loose or damaged...

Well I am not the only one but maybe my eyes are made of surge and I am big sissy hahah but I do think some times it be nice if they put more thought in to the dimmer module, mabye like if you were to hold you brakes steady it would dim down like if you were in traffic at light and the...

100w that be so funny big massive brake lights