Search results

great tread. im on same page as 7matt-ge. i got plans for getting boost controller and fuel controller, and upgrade fuel system, then i just need hard pipes for turbo in intercooler, and i belive seein bolt in side of oil pan (oil return from turbo?) and the oil supply is no sweat, same for...

thanks i actually just looked at it yesterday and noticed that the control valve is most likely the problem. only thing is i never opened up a rack and i do not know how to correct the problem.

haha i have had the car since before i graduated and its still not registered and on the road. im 18 btw so its been bout 5 months i been working on this car. still got to paint it and get rims and this winter i am rebuiling a gte and r154 tranny. still need the rear end and gauges. but the car...

my stabilizer didn seem to go on right either but yes, the entire system was cleaned, matter of fact the pressure line is going to be replaced due to a small hole in the rubber that shoots fluid onto the manifold (i.e fire hazard) the stabilizer had about 1/8 bind in it. as in i bolted it up and...

i have gone threw 2 rack and pinions and now im running out of options. the problem is that it has more power assistance left and less turning right. i know of one other person that has same problem i i could benefit from good information. the rack and pump are new, the lines and resivor where...

hey im intersted in mounting some 17'' x 9'' cobra rims on my supra. any modification needed? and where did u get the louver for the hatch window? i want one but never seen one for mk3 for sale. what did yours come off of? thanks

well i jacked one wheel up and left park brake off, and put the trans in gear then rotated the one wheel and looked and listened for something. sounds to be comming from the front of trans. and it looks like the clutch master could be leaking a little but nothing terrible.

yeah its aclunk sound. that would b a bettr description of the sound

the car jerks hard between accel and deaccel, and i have driven other straight shifts and none of them where that bad. i have a 88 yota truck with twice the miles and the rear is wore out, but its nothing compared to the supra and how much lash it has. something is not right. the diff seems...

the diff is not the problem. i have checked it. its not a lsd either. the lash happens when i let off the gas and get back on the gas.

my 86.5 will lash as if the diff was wore out but there is no play inthe rear end. other possiblites are the center support bearing have free play,also the clutch pedal is low on the floor. it does disengage and engage properly,but when i accerlerate and deaccelerate or vice versa there is a...

while where talking about na-t. i am on the same road (1986.5 supra 130xxxmiles) i want to get a turbo form gte and bolt it on and run low boost. i have done some research but i want to keep my ge electronics. everyone says gte swap. but i have heard na have less boost lag due to higher...

hel yeah on the nfs shift!! love that corolla!! but online wit that game is annoyin, lp640 lambos are over rated!!! haha still smokem in hole shot with the old evo and escort and supra and alot of low tier cars. haha and yeah im on mw2 now and again but my internet to a giant $h!t so now im...

im really considering getting into rally racing. i have idea of my choice of cars, fr cheap gutless (so i can learn keeping momentum). i need some help getting into events and practicing(live in suburbia) any drivers out there please help with guiding me into a sport i want to be apart of. also...

okay so i had same problem with the hatch leaking but now i dont. there is a piece of trim at bottom of window and u can access it by removing the plastic trim on inside of hatch. it pops off. look for bolt studs sticking out of hatch along the window there are 4. remove them (8mm nuts) then...

okay so i had same problem with the hatch leaking but now i dont. there is a piece of trim at bottom of window and u can access it by removing the plastic trim on inside of hatch. it pops off. look for bolt studs sticking out of hatch along the window there are 4. remove them (8mm nuts) then...

sweet front bumper!!!! props bro on the CF!!!!!!!

so the spoilers that are 3 piece will mount on? just curious i have 86 model too

aadsen, did u solve ur hatch problem? i have same problem. but i have no spoiler. and i have tried silicon around the bottom molding with no luck the water fills up just the same.

when u take the trim off on hatch its still hard to see exactly where it leaks due to all the renforceing. but yeah i did the silicon around bottom molding..kinda slowed the problem but i think when i get the money im gonna have glass re fitted and seald.