Search results

  1. SUPRASTEVE

    Mass air flow sensor for Mk3 Turbo Supra

    Okay so i've been farting around with the problem of MAF's not working or I just buy them and then end up returning them due to people selling broken crap. When I took my car in the Toyota Specialist said the reason why my MAF blew out (which I bought because the old got water damage due to...
  2. SUPRASTEVE

    Status on the Supra

    so we took it to a specialist for toyotas. Apparently the stupidest thing was broke on it. THe Air flow meter. I didn't bother checking it because i changed it. Apparently I bought it for an 89 turbo auto not a 5spd and so it blew out. So the specialist says. So any one in SO cal got one. I am...
  3. SUPRASTEVE

    Possible fuel problems

    Well I have concluded that all boost hoses and other hoses are fine. I have no leaks. I have replaced the fuel filter and the car still acts the same. bogs on accel and deccel. I think I will check the injectors with an ohm meter. I also found a good deal on Eibach springs and tokico shocks...
  4. SUPRASTEVE

    I bought some lowering springs for my Supra

    I have an 89 turbo targa tems supra. I happen to get a really, really good deal on a set of Eibach springs for the Supra. The thing is I am not sure they are going to work. They are attached to the Tokico Blues (non TEMS) struts. My supra has tems and mines an 89 and the struts and springs I...
  5. SUPRASTEVE

    Question about Foglight rewire

    Hey guys I did my foglight rewire using this site http://the-ish.com/supra/?p=13 It states that I can turn on my foglights without anything on. Well I can only turn them on when I have ignition on. Does that mean I accidently wired them to ignition? If so then I will fix plus I am not using...
  6. SUPRASTEVE

    what do you guys think of this IC pipe?

    I know most of you are going to say get the LIPP kit but ya know what I am not made of money and I want my car running right now, with something that I feel won't take a crap on me. No my car is not stock its running a Full exhuast from the turbo and I think I blew this hose.Don't worry I am...
  7. SUPRASTEVE

    Issues Calibrating the TPS on an 89 supra 7m-gte

    Well after having installed a new CPS and timing it and all that. I decided it would be agood idea to calibrate the TPS. I've used this site http://mkiiisupra.net/bbs/showthread.php?t=12132&highlight=guide+cam and the TRM. However my three "non supra experts" includeing myself. Can't figure it...
  8. SUPRASTEVE

    The Supra gets closer and closer to running again

    Well the timing as some of you know is correct on my 7m-gte 89 supra. yay! I checked the codes and I got 34, and 51. B4 I changed the CPS I changed the TPS. I put it in wrong I guess because the cars throttle response and idle seemed worse then b4. So I took it out and put it in again to where...
  9. SUPRASTEVE

    Well the supra is running again but I still have that bog after 3k rpm

    7M-GTE 89 5spd So the reason why the Supra did not start was the CPS. We timed it and also followed the book on the CPS setting and the car starts fine and it used to idle fine, The cars BDC is at 13, is that right for the 7m-gte? The car still bogged after 3K rpm. I put in new NGK IRIDIUM...
  10. SUPRASTEVE

    Hesitation under acceleration

    Well I failed trying to explain this in a different thread so I am tring again in detail. It started last sunday. I ran the car around the block hard in the morning the car was warmed up and everything seemed fine but I noticed that the Supra seemed a lil slower than usual. I came home and then...
  11. SUPRASTEVE

    The Supra feels and smeels funny (bad 02?)

    Well a month ago I checked my codes and it said that my 02 sensor was faulty. Couldn't do much cuz I didn't have the money. So today i was driveing the supra and the car feels gutless. and it sputters when i hit 3000rpm and feels like theres no gas comeing in. Plus the car smeels like crap so...
  12. SUPRASTEVE

    Anyone know where to get an alluminum crank pulley(7M-GTE)

    I kept thinking whats the cheapest way to free up some horse power and shine up the engine bay. I said a crank pulley. I've been looking around and I can't seem to find any. I went to ebay and obx sells them.I want more options though. Does anyone have any ideas? -Steve Z
  13. SUPRASTEVE

    Driver side quarter glass leaking

    Well I was getting my jack out from the side compartment in the hatch. ya know the one on the driver side, and I pulled it out and it was soaking wet. So I felt around in there and there was about 3 inchs of water in there. I got a shamy and sucked it out and dried it out. Today I checked and...
  14. SUPRASTEVE

    I think dark blue supras are rare LOL

    Well I am pretty sure they are because there are hardly any of them out there. It sucks mine used to be that sweet dark blue untill the previous owner painted it barney purple. They didn't even paint the door jams or take off the molding or wing and you can still see dark blue in those spots...
  15. SUPRASTEVE

    Killswitch for Supra (fuel and momentary)

    I want to know if anyone has done this and I want to know what do I need to do create a momemtary switch replaceing the clutch momentary with a different switch. I also want to know how to put a kill switch for the fuel pump. Placement is up to me for securty reasons but thats common sense. So I...
  16. SUPRASTEVE

    what is good type of gear oil to put in my R154 tranny?

    I don't know the weight nor a good brand. Up to knowledge my tranny has never been serviced. Gears feel dry, and can be heard at idle. Could I put Lucas gear oil and something else?
  17. SUPRASTEVE

    Temp gauge is acting funny

    89 turbo 5spd supra. I've been noticeing that when I am driveing the temp gauge will drop suddenly then raise back up. I wanted to know what I have to do to fix this problem. I have no idea on how to fix this so are there any remedies? My thanks -Steve Z
  18. SUPRASTEVE

    i have a question about a hose

    I have 89 turbo supra and I am leaking oil from a big hose comeing from valve cover number one I believe and it connects to the block. I wanted to know what the specific name of that hose is so I can replace it. It has some type of black fitting on it.
  19. SUPRASTEVE

    7m-gte intake manifold question

    Now I've seen this done b4 but how. Okay I've seen the 7M-GTE have the intake manifold on the right side only and not going over the valve covers. How do you do that Do you get the manifold off the 1JZ or 2JZ? I also wanted to know what's a good intercooler that is suitable for 500hp/or higher...
  20. SUPRASTEVE

    Mk3 small rear window moldings

    Does anyone know the proper procedure on how to retrive these molding without any problems. The one molding that curves gives me problems.