Search results

So I was doing a good strong first gear punch, shifted into second, barked the tires, then a split second hesitation, then she takes off again and barks em again. It only does this at WOT between gears, doesn't seem to do it at other throttle points other than wide open throttle. I...

Has anyone done this mod after installing an aftermarket boost gauge; in lets say a guage pod; and replaced the stock boost gauge with the stock volt gauge? What I want to know is how you hooked up the volt gauge, did you use existing contacts points on the printed circuit or did you just...

Just got a HKS SSQ and directions are in Japanese. Looked at HKSUSA, but was no help. Need to adjust bolt on the top, but would like to know which way to turn it and how much. Thanks Wayne

My 91 needs a drivers side motor mount; where do you guys get your replacement mounts. Have had no luck with any oem parts houses online. Wayne

First off, I know what the death whine sounds like--the one when there is so much shaft play that the compressor actually scrapes the housing. This is not the sound I am getting. Car drives fine when off boost--sustained cruising. Idle is fine, 22 inches of vacuum. When going into...

Running rich at idle, black smoke and such. Sometimes will stall on decel. Check engine light on at idle. Light goes off past 2,000 rpms and seems to run fine. As soon as you decel to 2,000 rpms or lower, light back on. Pulled codes---31---- AFM Have any others experienced this...

Just got my Greddy turbo timer and harness, but I don't speak Japanese. Any help out there? Thanks Wayne

Seen some guys have the hatch bar, where can you buy one? Wayne

Since we have a real boost gauge in the Lotek pod, we want to put the n/a volt gauge in the old stock boost gauge's spot. Need to know if you just un-plug the factory boost sender on the driver's side fender and install the n/a volt gauge in place of the factory boost gauge using the provided...

Wondering was there any trade off when going with the one piece driveshaft, since it seems like the tranny and the 3rd member are not in a perfect straight line. Any comments will be appreciated. Thanks Wayne

Been looking for some front lower control arm poly-u bushings since Toyota doesn't sell them because they want you to buy the entire control arm. Haven't had any luck, so I'm asking for a possible source. Thanks Wayne

Been working out of town for a while now, the last couple of trips I have noticed quite a bit of oil consumption, maybe a quart in 200 miles. Not smoking or leaking anywhere. Wondering if seals in turbo are about out. Maybe someone else has experienced this and shed a little light on it...

Just did the 5 speed swap. Came out real nice but I seemed to have picked up a driveline vibration. Ordered a new center carrier bearing from Toyota, but when it came, it wasn't the same part as what came off it. So they are ordering me another one. The vibration starts coming on at about...

What company makes the correctly colored and fitment A pillar gauge pods? Thanks Wayne

O.K. Here is the deal. I am having some problem with my front end shimmying at hiway speeds. Before you say tires, I already put new tires on it Monday, this week, and have had them balanced 4 times and had it aligned once. The last time they were balanced, I noticed a ever so slight hop...

Want to be sure that the model is the GSS 341. Thanks Wayne 3rdtimearound

Lucked out and got a set of 89 calipers, kinda borrowed, took them apart and cleaned, order new OEM rebuild kits, and was taking them to a buddy that powder coats stuff for me. Got to looking at them and they are a little bit different from mine ('91 model). Gonna physically "try them on"...

Just a couple of questions. Interested in doing the oil catch can conversion, the oil filter relocation conversion-(like to do this one first since oil filter retrieval is such a bitch), and get some white face gauges. Need to know when plumbing in the catch can-- just put it inline...

Need to know if the auto and 5 spd rear ends are the same gear ratio? Thanks Wayne 3rdtimearound

I will be dropping the 154 in real soon and was wondering about what the hot clutch set-up is. Also, haven't read much in the forums about the lightened flywheels. I had a Fidanza on my Conquest and it really made a difference, but that stock flywheel was 38lbs, the stock mkiii doesn't feel...