Search results

Welcome man and post some pics!

How hard is it to install the 300 km/h Blitz Speedo face into a gauge cluster?? If you remove the speedo screws does it ruin the gauge cluster and how would a speedo shop calibrate it properly? Any info on speedometer face install would be great. Geoff

That is a really nice vid. Definitely up there and Nice job!

YES it is possible because I have done the two rear exhaust studs that is around Cylinder 5 and 6 and if you have a steady hand and know what you are doing than yes.

Very Nice

After I install it and it works I will let you know the details but I don't want to make anyone buy the wrong bulb but I bought 2 Ba9s Wide Angle LEDs. Geoff

Thanks guys I will give it a try it and show pics if it turns out really well. Geoff

I was trying to put LEDs in the dome lights and I am wondering how you take the dome lights plastic off. Is it connected by clips???? Geoff

My TRD clutch seems to be perfect and great clutch feel.

:biglaugh: That is hilarious that you are just hearing a little tapping noise because when 1 of my cars exhaust studs are down on torque I hear a loud tapping noise and you have 3 missing. You probably will have to helicoil the holes to fix the problem and replace the studs. Geoff

Very nice, I might retry helicoiling to stock size again due to one pulling out but if that fails I might give your 7/16 a try. I definately agree with the stock studs being way too small. Geoff

I think you should drain the oil to find out how much oil is in the motor/shavings and then re-change the oil and then take a stethescope or hose and search for the noise. Then maybe tighten the exhaust manifold studs and valve covers because it could be the head clicking. I think you...

I think around eight 10 mm Toyota bolts but don't know exact dimensions though.

I think 2" is perfect and put me down for one and I also noticed there are a lot of guys from Calgary wanting one and we could maybe combine shipping to save Keith some hassle but it is up to you. Geoff

This is a stupid question but do you need to wire any resistors to make the LEDs work or is it plug and play??

Get it from Toyota because it has a bunch of kinks and is form fitted.

WD40 fixes everything spray the linkage.

The bottle is such a pain in the ass. It supposedly slides out by itself but I squirted a ton of penetrating oil and then wiggled and pulled it out. Geoff

Did you lose your license/ get arrested??????

I have a 1990 car so I guess I have 6 speakers and the wiring harness plug looks identical with the same number of pegs. It looks to me to just be plug and play but any more info would be great.