Search results

I am wondering what the hose is called from the block to the cams? I have tried going to my local vatozone with no luck! And I have tried googling it also with no prevail. Thanks Dustin

Want to know how bad i am sitting. So what is done to the motor, bored. 17 over, copper ringed block, metal head gasket,arp bolts, brand new rebuilt. 57 ct26, lexus afm with lexus electronics, 550 injectors, fuel pressure set to 45psi. 2.5" straight pipe all the way back not enough room under...

I know i probably haven't been searching long enough, but i haven't been able to find it. I am wondering what trouble code will come on while driving and then go off without leaving a code stored? I believe a long time ago I read that a tps code will come and go?! When the light comes on I do...

I have been looking for the last couple days for parts for the 26. specifically the 57 trim compressor housing. So my question is is there any where that sells the housing bored out or do I have to get a local machine shop do it for me? Thanks Dustin.

I have done a lot of searching on copper head gaskets for our motors, and not finding a whole lot, my block has been o-ringed so I do believe this is my only option for a hg. I would rather not take the rings out and then run a mhg leaving the bore from the rings and puting the gasket over it...

finally got the car running but now having issues trying to purge air out of the cooling system. it also has erractic idle. I hooked up a block tester and found I had a bad heater core replaced that got it back up and running and same thing heats up bubbles a little bit and once the stats opens...

Its been an on going issue just need some ideas/help! I am getting a code 12 I cleaned the cam sensor took the pickups out and took some steel wool and wiped them down same with the rotor and gear, regapped to .008-.016 and everything inbetween where the specs say to have them gapped but every...

having issues all the way around! so I have got the car to start a couple times idle then dies when I touch the throttle. after a busy couple weeks at work, went to fiddle with it some more, and now it tries to starts but doesnt, it throws a code 12, I rechecked the gaps on the the cps they are...

need some help! A little background. car 77 celica lift back. motor 89 7mgte stock harness and ECU. Problem is I am not getting pulse to the injectors. I have voltage to the injector resistor thingy. gapped and tested resistance at the cps and that tested good. all grounds are good on the engine...