Search results

The old block head does not fit? Drill holes in the cylinders.

Can you put the crankshaft sensor on the crankshaft pulley, and leave the camshaft position in the cps? What ecu do you have?

It's a pity.

Ok. Where can I find it in the form of a dump?

Yes, I want to remove afm.

Can you read your chip rom and send it to me for comparison with my chips? In beat or hex files format.

I live in a sanctioned country. Now I can't pay Gordon or buy anything from him. Paypal and mastercard are gone. I can only communicate on the Internet.:)

Do you have the ability to read your chip\rom? I have dumps of all 3 chips. If you could read and send me the dump, I could compare their dumps.

I need it for VPC and for 7m.440сс

Hello. I also have a hks VPC, but a chip for 1G engine.I bought a 7m rom on ebay but it didn't work. And then I bought a 7m rom from Gordon in Texas. Unfortunately it didn't work either. Do you have a rom chip in hks vpc for 7mgte? Does it work properly for you?

Welding rod.

Repaired bumper. Removed old traces of repair metal plates and rivets and welded with a polyurethane additive.

I use wire m22759.

The temperature sensor on the instrument panel is very slow and will only show a high boiling point when the engine is very hot. I have an additional greddy temperature sensor installed. This is very revealing. The sensor itself is installed at the outlet of the 6th cylinder. When the sensor...

Horror.

Ok )

To remove the bottom cover, just unscrew the bottom side stops.Then the lower crescent will be removed. It consists of two parts.

The top bolts are easily unscrewed from under the hood. The torque converter must be unscrewed from the flywheel and left in the box! If the torque converter is left screwed to the flywheel and the engine is pulled out with it, then the oil seal in the automatic transmission can be damaged. You...

Motec I'll try to connect to 3 lines oem.

I remember the last thread.