Search results

no compression in all cylinders or just a few?

The exhaust a/r is around .55 with a 76 trim t4 turbine wheel. This combo provides quick spool from the .55 a/r while maintaning good top end potential from the large 76 trim wheel. As far as hp potential, the compressor section has a 4" inlet and 2.5" discharge,flows 65 lb/ min which can easily...

Couple things to check, First (now bare with me on this one) Are your lug nuts tight? This sounds really stupid but it happened to my friend. No really it wasnt me..:) Second .. your struts might be shot, or the retaining nut is loose. Remove the TEMS cover and actuator and check to see if the...

Thats the plan... I hope that he will at least admit that it was his fault this time. The last time it happened the shim broke into 3 peices, sparing the pin but wiped out the lobe. The guy tried to tell me that the shim broke first, then flew out of the lifter. This is quite possible, but he...

I have about 1000 miles on this head since it was rebuilt by a local speed shop. I had them install a set of cams out of a N/A 7M, and of course they adjusted the valves to the new cams. While I was installing the head, I noticed that they had graciously left me a "bonus" shim wedged down in the...

No this is not a ball bearing turbo. We can get you a ball bearing GT30 or GT35 if you want, but it will be $300 extra. The exhaust housing on the 62-1 is designed for quick spool, so you really wont need a ball bearing center section in our opinion, but we can get you one if you want. Thanks...

Lets see...... Ours has a larger compressor wheel and housing (4" in, 2.5" out- which flows 65 lb./ min.), larger turbine wheel, larger wastegate, and comes with a stainless steel 3" divorced downpipe. And according to this http://www.suprasport.com/product.asp?itemid=108&catid=64 ,ours is...

No testing yet. I'm waiting to get this on my car first before I even consider selling it. Due to the fact that we are a small company, and that my car is quite the frankenstein ( JP Autoworks custom water/air I/C with 3" piping, Stock AFM and Injectors, Vortech 4:1 FMU, 60-1 CT-26, 3.5" turbo...

Please note that this is not a group buy yet, just seeing if there is enough interest. My company, JP Autoworks, would like to offer a true bolt on 62-1 turbo kit, NOT an upgraded CT-26. The turbo will bolt right up to the stock manifold, has a huge 38mm internal wastegate, and would include a...

the bov could definately be the culprit if it is not recirculated. I have a blitz super sound that is not recirculated and i have the same problem, except my car stalls often. I am currently in the process of piping it back in to the turbo inlet. Gonna miss that psssshhhh, but I'm sick of re...

...you completely gut your car and it still weighs two tons.....and STILL destroys lighter camaros and mustangs. I used to be an ignorant chevy head, and if I would have seen someone pull up next to me in my MKIII when I was in my '71 Z28, I would have laughed....and lost..BIG TIME :burnout:

...you change your oil at every repair and/or mod, because it is always less than 3000 miles