Search results

I dont know if anyone knows this. But Im trying to figure out the c/r of a GE block with 1jz head with stock TT HG

Ok I'm not a noob I know how Intercoolers and aftercoolers work but here is the deal.. Im thinking of using a m112 eaton roots blower on a 1uz. like this.. On the Ford lighting it is cooled with an Air to water aftercooler that is placed INSIDE the intake plenum like this.. It works by...

Anyone know if there is valve clearance issues with this combo?

I Have the chance to pick up an e6k with harness for really cheap, I did a search and got a little info, but I want to clarify some things. Can you use the stock toyota cam angle sensors, and crank angle sensor? Any parts fabrication needed to run this system? What sensors would I need to...

I have a 1jz 240 Weight 3097lbs Crower small core 272's BC springs and retainers Garrett 60-1 .84 backhousing Walboro 255 Sard 680cc SAFC II Blitz access ECU (no rev limiter) 6psi it made 290rwhp on 14psi it made 421rwhp I dont know what it makes on 18psi, but Im guessing its...

Ebay turbos are not all bad, they are hit or miss. I have seen an ebay 60-1 make power for 3 years straight and still going to this day. and I have seen a t04e fail in a month. buth turbos were under $200

http://www.supraforums.com/forum/showthread.php?t=451022&highlight=stock+rods

If you are not sure on something please dont post. the stoke of the 2jz has nothing to do with this. the bore size is the same between both motors. there is no such thing as a 2.5 or 3.0 piston.

Im about to order that stage 4 from you. but why build it for 500? even for 600?

How much power do you plan to make with this built motor and what clutch will you use?

Waterneck bypass tube like $35 TT gasket- whatever that cost Headstuds- optional waterpump - optional

Which SB clutch do you have the feramic? and what is the load on SB PP's

Not an issue if you do the clutch switch mod, and also Aaron and driftmotion advertised the act PP at 3000 lbs and said it wont cause crankwalk.

If it cost more than the clucths in the first post. I cant afford it now.

No one making this much power?

This is for a 2jz/r154 that will hold 550+ foot lbs I have narrowed it down to these two.. Southbend Feramic http://www.suprasport.com/South-Bend-DXD-F-Track-Series-Clutch-Kit_p_477.html Stage 4 @ driftmotion http://store.driftmotion.com/static/i-stage4clutchkitforr154.php Which...

anyone tried http://www.suprasport.com/South-Bend-DXD-F-Track-Series-Clutch-Kit_p_477.html

tbcmorris I guess I assumed 7m guys were making power. But after browsing around in there for a little I now see why he moved it. I dont really go in that section. maybe you are right, anything relating to 300rwhp or greater goes in the other engine section.

I posted a 7m tranny question I didnt post a chassis or motor question. My question was to help decide what clutch to us in my 7m tranny. Im still using a 7m tranny wether its in a supra or a helicopter.

Ok Why was this moved? I posted in the 7m section because thats the clutch I will be using with TQ numbers of typically higher than the average modded 1j