Search results

Well today I try a different tester and got some result. I got Cam both was around 1100 and crank was 1156 also tested another crank and got about the same thing. They are guys around but noone wants to help Thanks I will let you know if I need them.

Hey guys After my 1J swap the motor idle for about 5-10 min then shut off and won't start back. I'm getting no spark. I want to check my ignitor and jza70 ecu on your car or if anyone is nice enough to try theirs on mine. Thanks Advance

My 1J is not getting spark. After the swap the motor started right up and i only started it up two times for about 10 sec. Couple days after i got the Hydro, PS and Radiator all hook up. I started the motor and let it idle, after about 5-10 minutes the motor shut down and wont start. i found...

I'm sure they are their I didn't take the harness off the motor

I have no idea about the ecu ground

yeah i did it unplug i extend the wire and pin out the plugs to work with my car its is ground from the head to the body, tranny to the body and block to the battery (negative)

I tested and my electrician also tested my crank sensor and cam sensor (only got to the front one) and im not getting resistance at all!! How is it possible to damage both sensor? Motor only ran for 5 - 10 min Bad wiring? All i did was extend the sheild wire closer to the ecu connector (The...

oh i have saw them park at the gas station that would be great if you can pm me your number

yeah im in richmond Hill

After the swap i started the motor it started right up with no problem. Yesterday i finally got the coolant, PS and Hydro setup so i can have the motor running. The motor was running for about 5 to 10 minutes and it just shut off. i try to stared it back but it wont start. The motor is...

Is this hole where DM oil pressure sender hose goes? i try to screw it in but it wont fit their

thanks guys for the help i found the plugs and working on wiring them up. 1j wiring is super easy (most easiest thing in a 1j swap) imo that why i extend it rather than go the easy way.

Thanks Jono I was thinking it was the other way around

I have already extended my harness and now I have to wire everything up. I can't find the M1 11 pin connector that is behind the glove box also not on the 7m harness. The only connector that is behind the glove box is 1. IH1 2. IH2 3. Big gray 10 pin connector (is this one the m1...

I also have a 90 and doing a 1jzgte swap soon