Search results

First off let me thank everyone at supramania and clubna-t. With out all the help, this swap would not be possible. Plan is to do the 2jzge na-t swap into my 7mgte supra. I plan on using the 7mgte electronics and my HKS 57 trim turbo for now.:icon_evil eventually plan to get a piggy back...

sorry no pictures yet... i'll give the best description i can. On my 7mgte supra, under the intake manifold there are 2 "units". They have a brown 2 wire plugs that attach to each of them. They also have 2 vacuum lines that go to each of them. The "Units" appear to have an adjustment knob on...

I thought this was a t4 flange, but the t4 gasket i ordered doesn't fit. the flange is 9.7 cm by 10.7 cm anyone know what flange this is? thanks guys!

I need to order some stainless bolts to hold the turbo on. I have a T4 flanged turbo that has an adapter plate (t4-ct26 manifold) but i don't have the bolts/nuts or adapter plate for it at my shop to size the holes. What size bolt, thread pitch are normally used? If i remember correctly its...

The heater blows air, but its not warm. if the car is a 89 with a 88 ecu and engine wiring harness would any of the pins need to be swapped? anyone have any ideas Thanks guys

Ive had a problem with my brake system.:aigo: Before: The pedal would sink in 1/2 when i touched it and would stick down. I would have to pull it up by hand or it would brake the car automatically. After: So i replaced the master Cyl with a rebuilt one. I bled the Cyl, attached the 2...

Just got the supra back from paint. :biglaugh: RSP! FTW:biglaugh: What you guys think?:naughty: sorry, I haven't put her back together yet... i have all the molding, lights and spoiler in the trunk. :love: :biggrinbo :bowdown: :bigthumb...

On my 89 T when I lightly apply the brakes the brake pedal sinks down part way appling the brakes about 1/3 power. It will stick down and slowly rise up (takes about 2 seconds after my foot is moved off of it). My brake fluid is not low. What could be causing it to automaticaly apply the...

I noticed that there is a coolant leakage on the back of the motor. The top of the trans was soaked. In this picture.... http://www.supramania.com/forums/attachment.php?attachmentid=13784&d=1172883919 I suspect either the hose # 87246A or the fitting# 96112-10250. Does the hose #...

I just wanted to check and see if any of you guys would be interested in a set of powder coated cam gears. The gears are chemical washed, blasted, cleaned and powder coated. Post up ,Pm or e-mail me with any questions you have. I'll post what i have in the For Sale Section if there is...

Just wanted to get some tips for shifting a manual trans. car with out mashing the clutch. I have to drive with a severely sprained left ankle and I want to use it as little as I can get away with.:icon_conf Question: does it hurt the trans to pull the car out of gear (into neutral)...

where can i buy the rubber strip that sticks to the stock molding/trim that goes all the way around the middle of the car. In the picture its black, on the bottom of the trim pieces. Thanks!:icon_bigg

Where is the best place to install an aftermarket oil pressure sensor? Thanks chris

Ebay posts are not allowed on Supramania. Doubly so if you are posting in General. For sale posts go in the for sale section... I'd suggest you go to the for sale section and CAREFULLY read the rules before posting. They are very clear and will explain what was wrong with this post, and how...

Whitch vaccume line goes to the BOV. Purple cir is to the bov, is it the yellow or red arrow? Where does the vaccum line , yellow arrow, connect to?:icon_conf Thanks

on my 89 supra the head lights stay on all the time, if the battery is hooked up. IF i twist the headlight switch, they will pop up and high beams work. if i twist the switch off, they will go back down , but the lights will stay on...:nono: lol Any ideas? where should i start Thanks

heres a short video... lol http://www.youtube.com/profile?user=silvergsx623 im proud of it lol... $500 bucks :naughty: not bad

Im swapping over the engine harness/ecu out of my 88 turbo into my 89 turbo. I have everything hooked up except for these 2 plugs. What do they go to? This is picture 1 of the connector on the 88 engine harness. This is the same connector off of the 88 Engine harness wire colors are (from...

hey guys i just bought a nother 89 supra and i have no clue what turbo this is. What do you guys think it is? The inlet is 3 inches and its extranal gated the only markings i can see are numbers on the outside where the compressed air exit. it seys : 35288 any quesses would be great :)

one of my friends has a turbo supra i forget what year to be exact. hes got a 88 turbo parts car. Some of his engine wiring harness has failed (damaged) but the ecu and wiring out of the 88 are different. His is only firing on 4 cyls now. the plugs for the Ecu are different shape i told...