Search results

What's up DevilDog. This is not related to your post, but when I saw NAS Pensacola, the hairs stood on my back. If you don't mind me asking what are you currently tasked with down there? Are you with MATSG?

Is this what you are looking for? You were so close. Use the Electronic Parts Catalog (EPC) link from the Cygnus X1 site. You did not specify who you called. I usually work with Jeff at Champion Toyota. For him it works best if you describe the part you need. In my opinion, he...

Gents, thanks for the replies. I did not know that. Good info. Yup, that suits me best. I am a "set-it-and-forget" guy, so being locked out of the device is fine by me. I know the V-Pro supports up to 4 dealer tuneable fuel maps (91/93 octane, race fuel, etc) which can be selected by setting...

If you are, I have some questions for you. 1. Who installed/tuned it for you? 2. Are you running it as a Piggyback to the OEM ECU? 3. Other then the unit, custom harness, and tuning what else was required to get it running. Especially if you had to make changes to your engine setup...

Semper Fi! Devil Dog. Its been a while since my last Marine Corp Ball, but they sure are a blast. Thanks for sharing and bringing back some fun memories.

Interesting reading. I enjoy and follow the genre. Top 10 Lessons For Surviving A Zombie Attack: 1. Organize before they rise! 2. They feel no fear, why should you? 3. Use your head: cut off theirs. 4. Blades don't need reloading. 5. Ideal protection = tight clothes, short...

He goes by WOLFIE308 here on SM. I bought a set of clear fronts from him about 4-5 months ago. High quality stuff. Look up some of his previous posts. I think you will find what you are looking for there.

http://cgi.ebay.com/ebaymotors/MAGNAFLOW-Catalytic-Converter-Car-Sound-High-Flow-94109_W0QQcmdZViewItemQQcategoryZ33629QQihZ016QQitemZ7950579561QQrdZ1QQsspagenameZWD1V This is close if not the exact item I purchased about 7-8 months ago. Be careful though. I did not pass with this one. The...

I just wanted to pass on my experience in getting my 7MGTE to pass emissions testing this year. Maybe it will answer some questions that have not been asked and/or supplement others that have. It's a 91 with a new engine build. Mods as follows: - Full rebuild (machine work, balance, JE...

Borla Muffler to dual Borla oval tips

I just wanted to pass on my experience in getting my 7MGTE to pass emissions testing this year. Maybe it will answer some questions that have not been asked or expand on some that were. It's a 91 with a new engine build. Mods as follows: - Full rebuild (machine work, balance, JE Pistions...

Was it this one? http://www.sounddeadenershowdown.com/ I have been very interested in this topic for quite some time now. I went with a combination of RAAMAudio and something equivalent sold from www.mcmasters.com. Part # is 9709T39.

Exhaust:

Got my ride back from Driftmotion today. The Engine build and initial break-in has been completed by Aaron. Thanks BigA for your attention to details. In addition to the build, Aaron also fabricated and mounted my custom 3" exhaust. For now I have added pics of the engine bay and the...

I understand the benefits of Synthetic Motor Oil, but when can I start using it on my rebuilt motor? I have read or heard of mileage ranges from 500 to 10000. I would like to hear your opinion on this. Thanks

Here are the specs: Peak Power Handling: 300W Continous Power Handling: 100W Frequency Response: 40-23kHz I use the California Profile AP1000 (4ch - 250W Peak/100W Continous per channel) to power these. My stockers were blown before I got the car, so any speaker would had sounded...

Hi, I used the Polk Audio DB6500 Component set. I made no modifications to the door. It is not a direct fit, but I used the stock speaker mounting screws as kind of a placeholder to hold the new larger speaker in place. As for the tweeter, I removed the old one and wedged new in its place and...

Welcome, fellow Ducatisti. Are you planning on doing any maintenance on the Duc yourself?

This weekend I tested my new rim/tire rear clearance with the combo that will go on the vehicle. The pictures below show that there is some serious meat on the rears. That it stands taller then stock is no surprise. The online size calculators that I used confirmed that. Volk Racing GT-C...

I still have my receipt from my recent toyotaworld.com order. Here is the breakdown: They are called Reveal Moldings; Hatch Bottom - 75.89 Hatch Sides - 58.60 ea Just in case you were thinking of fronts; Front sides - 25.00 ea My current ones were obviously cracked and extremely...