Search results

cjsupra90 mine is exactly like the setup described in the picture. in from the bottom fitting (i.e the oil thermostat is on the top) than it fills up the tank, and out from the side fitting. suprahooked the lines were full at startup. i drove it for almost 3000km. before the...

i'm not sure of the clearances. i will aks this time around. IJ, it goes from the pump, then i believe it goes straight to the oil relocation out, to the oil filter, then to the feed on the bottom of the oil cooler, to the outlet of the oil cooler back to the motor.

here is a pic of my oil cooler setup. so if the temps aren;t at 180 the oil flows through the one endtank, and it fills up, and goes straight back to the motor? and then when it opens up, it fills the whole oil cooler? in the pic the bottom is my feed coming from the oil filter, and the...

my feed goes to the rx7 oil cooler side fitting. The oil thermostat is on the other side (out) and that goes back to my motor. could it be the lines are backwards? i still drove the car fine. I asked adjuster, and this was the method he choose.

tte, and pics of how your oil cooler is setup? my feed is on the bottom, and the return is on the top. perhaps it should be the other way? i don't see how it would matter though.

jdub i eliminated the stock filter head. My understanding of the oil cooler, is that all of the oil from the pump goes to the oilcooler, then threw the oil cooler back to the engine. is this correct? if your suggesting that the cooler must meet 180 degree's but the oil cooler...